Общий каталог SGS 2018

POS

TOLERANCES (inch) 55

D1 = +0.0000/–0.0020 D2 =h6							FRACTIONAL SERIES
		inc	h		EDP	NO.	• Unequal indexing, high
STEELS	CUTTING DIAMETER D1	LENGTH OF CUT L2	OVERALL LENGTH L1	SHANK DIAMETER D2	Ti-NAMITE-A (AlTiN)	Ti-NAMITE-A (AlTiN) W/FLAT	helix and an ideal rake and relief combination for unmatched finishing
STAINLESS STEELS	1/8	1/4	1-1/2	1/8	32672	–	capability
CAST IRON	1/8	1/2	1-1/2	1/8	32655	–	• The choice when peak finish quality is the
HIGH TEMP ALLOYS	5/32	9/16	2	3/16	32656	–	requirement
TITANIUM	3/16	5/16	2	3/16	32673	–	• Recommended for materials ≤ 45 HRc
	3/16	5/8	2	3/16	32657	–	(≤ 420 Bhn)
HARDENED STEELS	7/32	3/4	2-1/2	1/4	32658	–
	1/4	3/8	2	1/4	32674	–
or patent	1/4	3/4	2-1/2	1/4	32659	–
nformation visit www.ksptpatents.com	5/16	7/16	2	5/16	32675	–
	5/16	13/16	2-1/2	5/16	32660	–
	3/8	1/2	2	3/8	32676	32677
	3/8	1	2-1/2	3/8	32661	32662
	7/16	1	2-3/4	7/16	32663	–
	1/2	5/8	2-1/2	1/2	32678	32679
	1/2	1-1/4	3	1/2	32664	32665
	5/8	3/4	3	5/8	32680	32681
	5/8	1-5/8	3-1/2	5/8	32666	32667
	3/4	1	3	3/4	32682	32683
	3/4	1-5/8	4	3/4	32668	32669
	1	1-1/2	4	1	32670	32671

Общий каталог SGS 2018 - страница 61