Общий каталог SGS 2018 - страница 37

FRACTIONAL Z-Carb-AP 4 ≠ ≠ TOLERANCES (inch) Z1PLB 1/4 DIAMETER FRACTIONAL SERIES D1 = +0.0000/–0.0012 inch EDP NO. • Variable rake geometry D2 = h6 CUTTING LENGTH OVERALL SHANK REACH Ti-NAMITE-X alters and controls the DIAMETER OF CUT LENGTH DIAMETER cutting dynamic taking >1/4–3/8 DIAMETER D1 L2 L1 D2 L3 chatter suppression to D1 = +0.0000/–0.0016 an unprecedented level 1/4 1/2 4 1/4 1-1/4 36480 D2 = h6 • Unequal helix design 5/16 13/16 4 5/16 1-5/8 36482 changes the cutting >3/8–1 DIAMETER 3/8 7/8 5 3/8 1-7/8 36486 angle to improve D1 = +0.0000/–0.0020 harmonics 7/16 1 6 7/16 2 38490 • Long reach design D2 = h6 1/2 1 6 1/2 2-1/4 38492 allows for deeper and faster cuts 9/16 1-1/8 6 9/16 2-1/2 38496 STEELS • Ball nose design ideal 5/8 1-1/4 6 5/8 3 36500 for finishing operations STAINLESS STEELS 3/4 1-1/2 6 3/4 3-1/2 36502 in complex workpieces • Recommended for CAST IRON 1 1-1/2 6 1 4 36504 materials ≤ 45 HRc (≤ 420 Bhn) HIGH TEMP ALLOYS TITANIUM HARDENED STEELS For patent information visit www.ksptpatents.com 37 END MILLS www.kyocera-sgstool.com END MILLS