Каталог SGS микро инструмент 2021

Каталог SGS фрезы для алюминия S-carb

Каталог SGS монолитный инструмент из композитных материалов

Каталог SGS инструмент для обработки алюминия

Общий каталог SGS 2018

Общий каталог SGS 2021

Каталог SGS фрезы для труднообрабатываемых материалов Series 33

30° POS 15° 3

TOLERANCES (inch) .010–.120 DIAMETER DC = +0.000/–0.001

APMX

DC RE

DCON

M3 M3CR 1 .5xD

5xD

FRACTIONAL SERIES

			inch				EDP	NO.	• Three flute design
CUTTING DIAMETER DC	SHANK DIAMETER DCON	LENGTH OF CUT APMX	REACH LU	NECK DIAMETER DN	OVERALL LENGTH LF	CORNER RADIUS RE	UNCOATED	TI-NAMITE-A (AlTiN)	features improved chip space over four flutes and increased strength
0.010	1/8	0.015	0.050	0.009	2-1/2	–	09600	03535	and feed capability over two flutes.
0.015	1/8	0.023	0.075	0.014	2-1/2	–	09607	03536	• Enhanced corner
0.015	1/8	0.023	0.075	0.014	2-1/2	0.003	08782	08884	geometry with tight
0.020	1/8	0.030	0.100	0.018	2-1/2	–	09614	03537	tolerance corner radii • Prorietar coatin
0.020	1/8	0.030	0.100	0.018	2-1/2	0.005	08785	08887	py g allows for superior chip
0.025	1/8	0.038	0.125	0.023	2-1/2	–	09621	03538	flow, driving industry leading productivity
0.025	1/8	0.038	0.125	0.023	2-1/2	0.005	08788	08890	and value, even at low
0.030	1/8	0.045	0.150	0.028	2-1/2	–	09628	03539	spindle speeds. • Hih erformance
0.030	1/8	0.045	0.150	0.028	2-1/2	0.005	08791	08893	g p carbide substrate
0.031	1/8	0.047	0.155	0.029	2-1/2	–	09635	03540	designed specifically for Micro Tool alications
0.035	1/8	0.053	0.175	0.032	2-1/2	–	09642	03541	pp. • Broad portfolio, offering
0.035	1/8	0.053	0.175	0.032	2-1/2	0.005	08794	08896	consistent lengths
0.035	1/8	0.053	0.175	0.032	2-1/2	0.010	08797	08899	of cut, to ensure application demands
0.040	1/8	0.060	0.200	0.037	2-1/2	–	09649	03542	are met.
0.040	1/8	0.060	0.200	0.037	2-1/2	0.005	08800	08902	• Advanced geometries that extend tool life,
0.040	1/8	0.060	0.200	0.037	2-1/2	0.010	08803	08905	reduce chatter, cut cycle
0.045	1/8	0.068	0.225	0.042	2-1/2	–	09656	03543	times, and improve part quality.
0.045	1/8	0.068	0.225	0.042	2-1/2	0.005	08806	08908	• All tools in stock to
0.045	1/8	0.068	0.225	0.042	2-1/2	0.010	08809	08911	meet customer order it
0.047	1/8	0.071	0.235	0.044	2-1/2	–	09663	03544	requremens. • All micro tools are
0.050	1/8	0.075	0.250	0.047	2-1/2	–	09670	03545	manufactured in
0.050	1/8	0.075	0.250	0.047	2-1/2	0.005	08812	08914	accordance with the KSPT ISO certified
0.050	1/8	0.075	0.250	0.047	2-1/2	0.010	08815	08917	quality procedures.
0.050	1/8	0.075	0.250	0.047	2-1/2	0.015	08818	08920
0.055	1/8	0.083	0.275	0.051	2-1/2	–	09677	03546
0.060	1/8	0.090	0.300	0.056	2-1/2	–	09684	03547
0.060	1/8	0.090	0.300	0.056	2-1/2	0.005	08821	08923
0.060	1/8	0.090	0.300	0.056	2-1/2	0.010	08824	08926
0.060	1/8	0.090	0.300	0.056	2-1/2	0.015	08827	08929
0.062	1/8	0.093	0.310	0.058	2-1/2	–	09691	03548
0.065	1/8	0.098	0.325	0.061	2-1/2	–	09698	03549
0.070	1/8	0.105	0.350	0.065	2-1/2	–	09705	03550
0.070	1/8	0.105	0.350	0.065	2-1/2	0.005	08830	08932
0.070	1/8	0.105	0.350	0.065	2-1/2	0.010	08833	08935

STAINLESS STEELS

continued on next page

Каталог SGS микро инструмент 2021 - страница 29

Навигация

M3 M3CR 1 .5xD

5xD

Каталог SGS микро инструмент 2021 - страница 29

Навигация

M3 M3CR 1 .5xD

5xD

Отправьте заявку

На подбор необходимой оснастки и оборудования