Saw Blades / Saw Frames Machine saw blade HSS-VP7, variable toothing Design: - variable tooth pitch, 7° positive rake angle HSS - pilot teeth for straight cut, variable tooth pitch for vibration-free and +7° clean cut - the advertised cutting data require a proper employment of the blade Note: Type S: Especially for Kasto machines with offset clamping bore Use: For stainless steel grades, long-chipping and stringy materials Cutting speed Withwviftoahrrilaaobwclleeviatbonroactthuiotpnistch Material strength 491550 Type VP-7 Length mm /Teeth per inch491550 Width × thicknessmm Clamping boremm Length mm /Teeth per inch491550 Width × thicknessmm Clamping boremm 300-4/7  30 × 2.0  8.5 500-3/4  40 × 2.0 Kasto 350-3/4  35 × 2.0  8.5 500-4/7  40 × 2.0 Kasto 350-4/7  35 × 2.0  8.5 550-4/7S  50 × 2.5 13.0 350-6/10  35 × 2.0  8.5 575-2/3  50 × 2.5 Kasto 400-3/4  30 × 2.0  8.5 575-3/4  50 × 2.5 Kasto 400-4/7  30 × 2.0  8.5 575-4/7  50 × 2.5 Kasto 400-6/10  30 × 2.0  8.5 600-2/3  50 × 2.5 Kasto 49 400-3/4S400-4/7S  35 × 2.035 × 2.0 10.510.5 600-3/4  50 × 2.5 Kasto600-4/750 × 2.5Kasto 400-6/10S  35 × 2.0 10.5 650-3/4  55 × 2.5 Kasto 450-3/4  35 × 2.0 10.5 650-4/7  55 × 2.5 Kasto 450-4/7  35 × 2.0 10.5 700-2/3  55 × 2.5 Kasto 450-2/3S  40 × 2.0 Kasto 700-3/4  55 × 2.5 Kasto 450-3/4S  40 × 2.0 Kasto 700-4/7  55 × 2.5 Kasto 450-4/7S  40 × 2.0 Kasto 450-4/7S  40 × 2.0 Kasto Machine saw blade HSS-P-13 Design: - claw tooth, 13° positive rake angle HSS - excellent cutting results through cutting edge geometry; minor cutting 13° edges stabilise the blade in the cutting duct - esp. for the cutting of rust- and acid-resistant steels Cutting data: Tooth spacing: 3 teeth/inch for profiles from 50 - 200 mm 2 teeth/inch for profiles from 150 mm Cutting speed: 10 to 20 m/min. 491650 Type P-13 Length mm /Teeth per inch491650 Width × thicknessmm Clamping boremm Length mm /Teeth per inch491650 Width × thicknessmm Clamping boremm 350-3  35 × 2.0  8.5 575-3  50 × 2.5 Kasto 400-3  35 × 2.0 10.5 600-2  50 × 2.5 Kasto 450-3  40 × 2.0 Kasto 650-3  55 × 2.5 Kasto 500-3  48 × 2.5 Kasto 700-3  55 × 2.5 Kasto 575-2  50 × 2.5 Kasto 575-2  50 × 2.5 Kasto 49/878 www.precitool.de