Dies Die HSS Cat. no. PN/mm2 Design:- form B closed140320< 850- with spiral point- tolerance field A G Whitworth HSS DIN Spiral point G. Whitworthpipe threadEN55°pipe thread24231DINToleranceISOfield228A vc = m/min. 140320 8-14 P Use: 14 For manual and machine use, to machine steel up to approx. 800 N/mm² plus differentmaterials. The spiral point causes a free flow of the chips forward and a reduction in theaverage torque. Chip clogging in the holes is avoided. An improved surface quality in the cut threads and longer service life is achieved. All dies used on machines must therefore be equipped with a spiral point. 140320 JBO, HSS, Whitworth pipe thread d1 140320 P d1 D Hmmmmmm d1 140320 P d1 D Hmmmmmm G1/8  28  9.73 30 11 G5/8  14 22.91 55 16 G1/4  19 13.16 38 10 G3/4  14 26.44 55 16 G3/8  19 16.66 45 14 G7/8  14 30.20 65 18 G1/2  14 20.96 45 14 G1  11 33.25 65 18 Die HSS Cat. no. PN/mm2 Design:- form B closed140400< 850- with spiral point- cone 1:16 NPT Conical HSSpipe thread Spiral point NPT 60° ANSI30° 30°B1.20.11° 47'1:16 P vc = m/min. - for threads and sealants 140400 8-14 Use: For manual and machine use, to machine steel up to about 800 N/mm² and diverse materials. The spiral point causes a free flow of the chips forward and a reduction in the average torque. Chip clogging in the holes is avoided. An improved surface quality in the cut threads and longer service life is achieved. All dies used on machines must therefore be equipped with a spiral point. 140400 JBO, HSS, American pipe thread, tapered d1 140400 P D Hmmmm d1 140400 P D Hmmmm 1/16  27.0 25 9 1/2  14.0 45 18 1/8  27.0 30 11 3/4  14.0 55 22 1/4  18.0 38 14 1  11.5 65 25 3/8  18.0 45 14 1.1/4  11.5 75 26 Die HSS Cat. no. PN/mm2 Design:- form B closed140450< 850- with spiral point from 5 - 40 UNC american HSS DIN Spiral pointENUNIFIEDcoarse thread22568UNC60° ANSI TolerancefieldB1.12A - tolerance field 2A vc = m/min. 140450 8-14 P Use: For manual and machine use, to machine steel up to about 800 N/mm² and diverse materials. The spiral point causes a free flow of the chips forward and a reduction in the average torque. Chip clogging in the holes is avoided. An improved surface quality in the cut threads and longer service life is achieved. All dies used on machines must therefore be equipped with a spiral point. 140450 JBO, HSS, UNC coarse thread d1 - P 140450 d1mm D Hmmmm d1 - P 140450 d1mm D Hmmmm 4-40  2.85 16 5 3/8-16   9.53 30 11 5-40  3.18 20 5 7/16-14  11.11 30 11 6-32  3.51 20 7 1/2-13  12.70 38 14 8-32  4.17 20 7 5/8-11  15.88 45 18 10-24  4.83 20 7 3/4-10  19.05 45 18 12-24  5.49 20 7 1-8  25.40 55 22 1/4-20  6.35 20 7 1.1/4-7  31.75 65 25 5/16-18  7.94 25 9 1.1/2-6  38.10 75 30 14/210 www.precitool.de