| P | M | K | S | N | M | | Metric DIN | Zähne |
| N/mm2 | N/mm2 | HB | N/mm2 | N/mm2 | | | 13 | 3-4 |
| | | | | | Metric | | | |
| 138925 | < 1400 | < 1100 | <300 | < 1250 Copper < 700 Alu < 600 | | thread | coated | | |
| | | vc = m/min. | | | | UNI | | |
| | | | | | | ICS | | |
| 138925 | 30-200 | 30-120 | 80-200 | 30-80 | 100-350 | 100-350 6535 HA | | | |
| | | | | | shank | | | |
| Design: | | | | | | Use: | | | |
13 - three-fluted thread milling cutter for female threads - universally applicable, also for materials up to 44 HRC
- 3 × D - high dimensional accuracy and cylindricity of the thread - TiAIN coated - low radial cutting pressure - shank design HA - from M4 with cooling duct and right spiral
138925 JBO, VHM, GFT, metric, 3 × D, TiAlN
| | | P | l | l | l | d | | fz |
| Type | 138925 | d | | 1 | 2 | 4 | 2 | Z | |
| | 1 | mm | mm | mm | mm | mm | | mm/tooth |
| 0004 | | M1�2 | 0�25 | 39 | 0�75 | 3�9 | 3 | 3 | 0�005 - 0�020 |
| 0006 | | M1�4 | 0�30 | 39 | 0�90 | 4�5 | 3 | 3 | 0�005 - 0�020 |
| 0008 | | M1�6 | 0�35 | 39 | 1�05 | 5�2 | 3 | 3 | 0�005 - 0�020 |
| 0010 | | M1�8 | 0�35 | 39 | 1�05 | 5�8 | 3 | 3 | 0�005 - 0�020 |
| 0012 | | M2 | 0�40 | 39 | 1�20 | 6�4 | 3 | 4 | 0�005 - 0�020 |
| 0014 | | M2�2 | 0�45 | 39 | 1�35 | 7�1 | 3 | 4 | 0�010 - 0�060 |
| 0018 | | M2�5 | 0�45 | 39 | 1�35 | 8�0 | 3 | 4 | 0�010 - 0�060 |
| 0020 | | M3 | 0�50 | 39 | 1�50 | 9�5 | 3 | 4 | 0�010 - 0�060 |
| 0022 | | M3�5 | 0�60 | 39 | 1�80 | 11�1 | 3 | 4 | 0�010 - 0�060 |
| 0024 | | M4 | 0�70 | 54 | 2�10 | 12�7 | 6 | 4 | 0�010 - 0�060 |
| 0026 | | M5 | 0�80 | 54 | 2�40 | 15�8 | 6 | 4 | 0�010 - 0�060 |
| 0028 | | M6 | 1�00 | 54 | 3�00 | 19�0 | 6 | 4 | 0�010 - 0�060 |
| 0030 | | M8 | 1�25 | 64 | 3�75 | 25�4 | 6 | 4 | 0�010 - 0�060 |
| 0032 | | M10 | 1�50 | 70 | 4�50 | 31�7 | 8 | 4 | 0�010 - 0�060 |
| P | M | K | S | N | UNC | Zähne ANSI UNC 2.5-3 |
| Cat. no. | | | | | | | 60° VHM × |
| N/mm2 | N/mm2 | HB | N/mm2 | N/mm2 | | 3-4 B1.1 |
| | | | | | american | D |
| 138927 | < 1400 | < 1100 | <300 | < 1250 Copper < 700 Alu < 600 | | UNIFIED | |
| | | | | | coarse thread | coated |
| | | vc = m/min. | | | | UNI |
| | | | | | | ICS |
| 138927 | 30-200 | 30-120 | 80-200 | 30-80 | 100-350 100-350 | | |
| | | | | | 6535 HA | |
| | | | | | shank | |
| Design: | | | | | Use: | | |
| - three-fluted thread milling cutter for female threads | | | | | - universally applicable, also for materials up to 44 HRC | | |
| - 3 × D | | | | | - high dimensional accuracy and cylindricity of the thread | | |
| - TiAIN coated | | | | | - low radial cutting pressure | | |
- shank design HA - from 32-8 thread with cooling channel and right spiral
138927 JBO, VHM, GFT, UNC, 3 × D, TiAlN
| | | l | l | l | d | | fz |
| Type | 138927 | P - d | 1 | 2 | 4 | 2 | Z | |
| | | 1 mm | mm | mm | mm | | mm/tooth |
| 0002 | | 64-1 | 39 | 1�14 | 6�0 | 3 | 3 | 0�005 - 0�020 |
| 0004 | | 56-2 | 39 | 1�33 | 7�0 | 3 | 4 | 0�005 - 0�020 |
| 0006 | | 40-4 | 39 | 1�91 | 9�2 | 3 | 4 | 0�005 - 0�020 |
| 0008 | | 40-5 | 39 | 1�91 | 10�2 | 3 | 4 | 0�005 - 0�020 |
| 0010 | | 32-6 | 39 | 2�30 | 11�3 | 3 | 4 | 0�005 - 0�020 |
| 0012 | | 32-8 | 54 | 2�32 | 13�3 | 6 | 4 | 0�010 - 0�060 |
| 0014 | | 24-10/12 | 60 | 3�18 | 15�6 | 6 | 4 | 0�010 - 0�060 |
| 0016 | | 20-1/4 | 60 | 3�81 | 20�4 | 6 | 4 | 0�010 - 0�060 |
| P | M | K | S | | N | | | 2.5-3 Zähne ANSI UNF UNF |
| Cat. no. | | | | | | | | | × 60° VHM |
| N/mm2 | N/mm2 | HB | N/mm2 | | N/mm2 | | | 3-4 B1.1 |
| | | | | | | | | D American |
| | | | | | | | | UNIFIED |
| 138928 | < 1400 | < 1100 | <300 | < 1250 Copper < 700 Alu < 600 | | | | | coated fine thread |
| | | vc = m/min. | | | | | | UNI |
| | | | | | | | | ICS |
| 138928 | 30-200 | 30-120 | 80-200 | 30-80 | 100-350 | 100-350 | | | 6535 HA |
| | | | | | | | | shank |
| Design: | | | | | | | Use: | | |
| - three-fluted thread milling cutter for female threads | | | | | | | - universally applicable, also for materials up to 44 HRC | | |
| - 3 × D | | | | | | | - high dimensional accuracy and cylindricity of the thread | | |
| - TiAIN coated | | | | | | | - low radial cutting pressure | | |
| - shank design HA | | | | | | | | | |
| - from 40-6 thread with cooling channel and right spiral | | | | | | | | | |
| 138928 JBO, VHM, GFT, UNF, 3 × D, TiAlN | | | | | | | | | |
| | | l | l | l | d | | | fz |
| Type | 138928 | P - d | 1 | 2 | 4 | 2 | Z | | |
| | | 1 mm | mm | mm | mm | | mm/tooth | |
| 0002 | | 64-2 | 39 | 1�14 | 6�0 | 3 | 3 | 0�005 - 0�020 | |
| 0004 | | 56-3 | 39 | 1�33 | 7�0 | 3 | 4 | 0�005 - 0�020 | |
| 0006 | | 40-6 | 39 | 1�91 | 10�2 | 3 | 4 | 0�005 - 0�020 | |
| 0008 | | 32-10 | 54 | 2�31 | 15�3 | 6 | 4 | 0�010 - 0�060 | |
| 0010 | | 28-1/4 | 60 | 2�51 | 20�0 | 6 | 4 | 0�010 - 0�060 | |