Общий каталог PRECITOOL - страница 1271

Extension pipe for air guns Design: - stable extensions suitable for all blow guns with M12 × 1.25 thread - the extensions can be equipped with nozzles (M12 × 1.25) - all extensions can be combined with one another for an even greater length selection and can be screwed together one after the other - at the input side, they are equipped with a rotatable locking device to position the pipe with nozzle correctly - bore x 8 mm - material aluminium anodised - max. operating pressure 10 bar Extra - temperature range from -10 °C to +50 °C sturdy version 925832 straight/curved Type 925832 Pipe lengthmm Threadexternal Design 0051  150 M12 × 1.25 straight 0052  300 M12 × 1.25 straight 0053  450 M12 × 1.25 straight 0054  800 M12 × 1.25 straight 0055  150 M12 × 1.25 curved 0056  300 M12 × 1.25 curved 0057  450 M12 × 1.25 curved 0058  800 M12 × 1.25 curved Air gun Plastic Magnetic holder Design: Design: - air volume doseable by means of operating lever - made of plastic - can be used for delicate blow-out operations - high retaining power due to 6 neodymium magnets - as soon as the distance between the nozzle and in the pot magnet, x 65 mm the surface is too small, the air escapes laterally - the rubberised contact surface is oil-resistant and - plastic handle, low weight avoids scratching of the holding surface - the special shaping allows 2 separately usable zones and prevents the attached articles from slipping or falling down Use: For hanging up or lightly fastening blowguns, cables, clothes, barrier tape etc. 925832 with safety nozzle, doseable 925833 Magnetic holder Type 925832 Connection 0060  G 1/4" internal thread Type 925833 Colour Weightkg 0062  with coupling plug NW 7.2 0010  blue 0.25 Air gun Design: - with fixed mounted pipe - plastic body - for superfine dosing - due to a special nozzle structure, the gun produces a particularly quiet, soft jet Noise protection nozzle 92 Protective shield Rubber nozzles Silencer 0022 0024 0026 925834 Plastic 925834 Mouthpiece max. Type 925834 Connec-tionNoise leveldBAir flowl/minoperatingpressure Design Type 925834 Design bar 0022  Protective shield (protects against flying fragments) 0010  G 1/4" 96 500 16 without noise protection nozzle 0024  Rubber nozzles (e.g. for sensitive surfaces, for leak testing) 0012  G 1/4" 79 190 16 with noise protection nozzle 0026  Silencer (reduces noise emission, 82 dB(a) noise level) 92/1266 www.precitool.de Coolants / Lubricants / Compressed Air