Общий каталог PRECITOOL - страница 1264

Cooling lubricant iTEC®-M iTEC®-M cooling lubricants are optimised for MQL technology applications. The selection of special oils and fatty alcohols permits to cover a broad range of operational steps. iTEC®-M 3000 For machining of all kinds of metals and many plastics. The product is applicable wherever cooling plus light lubrication is required, as is usual at the machining of cast iron and non-ferrous metals or the light machining of steel. The workpieces are comparatively dry after machining, which means that cleaning before further processing may normally be omitted. iTEC®-M 4300 For cutting and non-cutting treatment of all kinds of metals and many plastics. The product is preferably used wherever the surface quality to be achieved is paramount, such as drilling, threading and turning. Leaves a thin oily anticorrosive film. Welding is possible without pre-cleaning. iTEC®-M 4400 For demanding cutting and non-cutting machining of steel and alloyed steel. Also offers for difficult forming and machining operations of, for example, alloyed steels, excellent surface finishes and long tool life due to exceptional lubricating performance. Leaves a thin oily anticorrosive film. Recommendation: iTEC®-M 4400 discolours non-ferrous metals (e.g. copper and brass). This may be prevented by immediate purification of the workpieces. Alternatively we recommend iTEC®-M 4300 924040 Cooling lubricant iTEC®-M 3000 924042 Cooling lubricant iTEC®-M 4300 924044 Cooling lubricant iTEC®-M 4400 ContentsLitre 924040 924042 924044 10    30      + 92 www.precitool.de 92/1259 Coolants / Lubricants / Compressed Air