Общий каталог Osawa 2021 - страница 117

TYPHOON - high performance solid carbide drills CUTTING PARAMETERS INFO 355SUH MINI Material Group K1 K2 K3 K4 ISO 513 Hardness/Rm 150÷250 HB 150÷350 HB 120÷260 HB 250÷500 HB Vc (m/min) 80÷90* 70÷80* 60÷70* 55÷65* D fn fn fn fn CARBIDE (mm) (mm/rev) (mm/rev) (mm/rev) (mm/rev) DRILLS 1.0 0.016 0.015 0.014 0.012 1.1 0.018 0.017 0.015 0.014 PU-HPU 1.2 0.019 0.018 0.017 0.015 TA-4HTA 1.3 0.021 0.020 0.018 0.016 SUH 1.4 0.023 0.021 0.019 0.017 ALH 1.5 0.024 0.023 0.021 0.018 HRC SUH MINI 1.6 0.027 0.025 0.023 0.021 Ø RUN OUT 1.7 0.028 0.027 0.025 0.022 HL <0.02mm HSD 1.8 0.030 0.028 0.026 0.024 C-SD-TA 1.9 0.032 0.030 0.028 0.025 2.0 0.033 0.031 0.029 0.026 2.1 0.036 0.034 0.032 0.029 2.2 0.038 0.036 0.034 0.031 2.3 0.040 0.038 0.035 0.032 2.4 0.041 0.039 0.037 0.033 2.5 0.043 0.041 0.038 0.035 2.6 0.046 0.044 0.041 0.038 2.7 0.048 0.046 0.043 0.040 2.8 0.050 0.047 0.045 0.041 HSS 2.9 0.051 0.049 0.046 0.043 DRILLS 3.0 0.053 0.051 0.048 0.044 *if the machine tool or the equipment wouldn’t allow to reach the requested rpm, please use the max. available rpm recalculating the Vf value LFTA (Vf=n available x fn) SUTA HSS-HSS/CO Material Group N1 N2 N3 N4 N5 ISO 513 Hardness/Rm Vc (m/min) 140÷150* 120÷130* 110÷120* 155÷165* D fn fn fn fn (mm) (mm/rev) (mm/rev) (mm/rev) (mm/rev) CARBIDE 1.0 0.016 0.016 0.015 0.016 END-MILLS 1.1 0.018 0.018 0.016 0.017 1.2 0.019 0.019 0.018 0.019 G2 1.3 0.021 0.021 0.019 0.020 MDTA 1.4 0.022 0.023 0.021 0.022 HF VH/UP 1.5 0.024 0.024 0.022 0.023 MEF ALU 1.6 0.026 0.027 0.024 0.026 Ø RUN OUT 1.7 0.028 0.028 0.026 0.027 MEX/MH <0.02mm UH/MH 1.8 0.030 0.030 0.028 0.029 1.9 0.031 0.032 0.029 0.031 2.0 0.033 0.033 0.031 0.032 2.1 0.035 0.036 0.033 0.035 2.2 0.037 0.038 0.035 0.037 2.3 0.039 0.039 0.036 0.038 2.4 0.041 0.041 0.038 0.040 2.5 0.042 0.043 0.040 0.042 HSS 2.6 0.045 0.046 0.043 0.045 END-MILLS 2.7 0.047 0.048 0.044 0.047 2.8 0.049 0.049 0.046 0.048 2.9 0.050 0.051 0.048 0.050 3.0 0.052 0.053 0.049 0.052 *if the machine tool or the equipment wouldn’t allow to reach the requested rpm, please use the max. available rpm recalculating the Vf value (Vf=n available x fn) CARBIDE BURRS 116 Libro 1.indb 116 21/10/2021 12:08:40