Токарные пластины серии KCU10B с технологией покрытия KENGold PVD Kennametal 2023 - страница 70

Positive Insert Geometry Cutting Condition -11 -UF ..GT-LF -LF -FP -MP/-MF R.GT-MS KCM35B/ KCM25B/KCU25/ KCM25B/ heavily interrupted cut - KCU25 KCU25 - KCM35 KCM25 KCM25 KCM25B/KCM25/ KCM15B/KCM15/ KCM25B/ lightly interrupted cut - KCU10B KCU25 - KCS10B KCU10B KCM25 varying depth of cut, KTP10/ KCM15B/KCU10B/ KCM15B/KCM15/ - KCU10B KCU10B KCS10B casting, or forging skin KT315 KCS10B KCU10B KCU10B/ smooth cut, KTP10/ KCM15B/ KCM15B/ KCU10B KCU10B KT315/ KCS10B pre-turned surface KT315 KCM15 KCM15 KTP10 smooth cut, high KTP10/ KCU10B/KCS10B/ KCU10B/KT315/ precision / tight KCU10B KCU10B KCU10B KCS10B KT315 KTP10/KT315 KTP10 tolerance NOTE: Bold is first choice when showing multiple grades. Step 1 - Select the insert geometry Negative Wiper Inserts Positive Wiper Inserts 1/2” IC CNMG432 Size 3 CCMT3252/CCGT3252 feed rate (mm/rev) feed rate (mm/rev) -MW depth of cut (mm) depth of cut (mm) depth of cut (in) depth of cut (in) -FW -MW -FW feed rate (in/rev) feed rate (in/rev) Negative Wiper Inserts Positive Wiper Inserts 1/2" IC CNMG432 Size 3 CCMT3252/CCGT3252 min feed min DOC max feed max DOC min feed min DOC max feed max DOC mm in mm in mm in mm in mm in mm in mm in mm in -FW 0,2 0.008 0,3 0.012 0,4 0.016 2 0.079 -FW 0,1 0.004 0,2 0.008 0,3 0.012 2,3 0.091 -MW 0,3 0.012 0,8 0.031 0,6 0.024 5,1 0.201 -MW 0,1 0.004 0,4 0.016 0,5 0.02 2,5 0.098 70