Каталог Iscar токарный инструмент 2017 - страница 473

Предыдущая страница Следующая страница

Навигация

Face Grooving and Turning Recommendations

Using Adapters for 3 mm Inserts

Recommended feed range for grooving with Grip 3...Recommended depth of cut and feed range for turning
and HGPL 3... inserts and HGAIR/L and HGAER/Lwith HGPL 3... inserts with HGAIR/L and HGAER/L
adapters. Feed range changes according toadapters. Feed range changes according to
adapter type.adapter type.
mm/rev
0.08mm
0.08 0.081.2
0.07
0.071.0
0.06
0.050.8
0.05
0.040.6
0.04
0.030.4
0.020.020.020.020.020.02
0.2
40-6040-6040-8040-8040-80 m/min0.040.05 0.06 0.070.08 0.090.1 0.11 0.12 mm/rev

Cutting Speed Vc Feed HGAIR/L 21-3T9 HGAIR/L 12-3T6 HGAER/L 21-3T9

HGAER/L 12-3T6

HGAIR/L 25-3T9

HGAIR/L 14-3T7

HGAIR/L 14-3T7

HGAER/L 14-3T7

HGAER/L 14-3T7

HGAIR/L 17-3T8HGAIR/L 17-3T8
HGAER/L 17-3T8HGAER/L 17-3T8
HGAIR/L 21-3T9HGAIR/L 12-3T6
HGAER/L 21-3T9HGAER/L 12-3T6

HGAIR/L 25-3T9 Note: In roughing, increase feed at small depth of cut, and reduce feed at large depth of cut.

Face Grooving and Turning Recommendations

Using Adapters for 4-6 mm Inserts

Recommended feed range in grooving with HFPR/L

inserts and HFAIR/L & HFAER/L adapters. mm/rev 0.12 0.12 0.11 0.10 0.10 0.09 0.08 0.07 0.07 0.06

0.050.050.05
0.040.04
456mm

Width of Inserts (W)

Recommended depth of cut and feed range in turning

with HFPR/L inserts and HFAIR/L & HFAER/L

adapters. Feed range changes according to

adapter type. mm 2.5

2.0

1.5 1.0

0.5

0.05 0.1 0.15 0.2 0.25 mm/rev

Feed HFAIR/L- ...4 HFAER/L- ...4 HFAIR/L- ...5

HFAER/L- ...5

HFAIR/L- ...6

HFAER/L- ...6

Note: In roughing, reduce feed when depth of cut is

increased, ad increase feed at small depth of cut.