Каталог Iscar токарный инструмент 2017 - страница 254

GROOVE-TURN
±0.025
7°
GIF-E (W=4-6 full radius) 5
15.3 Ref.
Precision Double-Ended Full Radius
Inserts for Profiling and Grooving W
M
R=W/2


Dimensions Tough 1 Hard Recommended Machining Data


IC8250
IC830


IC808
IC20
ap f turn f groove
Designation W±0.02 R±0.05 M Tmax-r (mm) (mm/rev) (mm/rev)
GIF 4.00E-2.00 4.00 2.00 3.20 11.80 • • • • 0.00-2.00 0.20-0.34 0.09-0.17
GIF 5.00E-2.50 5.00 2.50 4.00 11.30 • • • 0.00-2.50 0.23-0.42 0.11-0.21
GIF 6.00E-3.00 6.00 3.00 4.80 10.80 • • • 0.00-3.00 0.24-0.50 0.13-0.25
• Dmin for internal machining = 70 mm • For cutting speed recommendations and user guide, see pages 340-351
For tools, see pages: C#-GHDR/L (233) • CGHN 26-M (302) • CGHN 32-DGM (304) • CGHN 32-M (303) • CGHN-D (239) • CGHN-DG (239) • CGHN-S (239) •
CGPAD (238) • CGPAD-JHP (238) • GHDR/L (short pocket) (233) • GHDR/L-JHP (short pocket) (234) • GHGR/L (235) • GHMPR/L (232) • GHMR/L (232)


±0.025 30 Ref.
GIF-E (W=8,10 full radius)
Precision Double-Ended Full Radius 7° 6.4
Inserts for Profiling and Grooving M
W
R

Dimensions Tough 1 Hard Recommended Machining Data
IC8250
IC830


ap f turn f groove
Designation W±0.02 R±0.05 M (mm) (mm/rev) (mm/rev)
GIF 8.00E-4.00 8.00 4.00 6.00 • 0.00-4.00 0.32-0.67 0.18-0.34
GIF 10.00E-5.00 10.00 5.00 8.00 • • 0.00-5.00 0.35-0.78 0.22-0.40
• Dmin for internal machining = 65 mm • For cutting speed recommendations and user guide, see pages 340-351
For tools, see pages: C#-GHDR/L (233) • CGHN-8-10D (244) • GADR/L-8 (243) • GADR/L-JHP (243) • GAFG-R/L-8 (451) • GHDR/L (long pocket) (240) •
GHDR/L-JHP (long pocket) (241) • GHFG-R/L-8 (450) • GHFGR/L-8 (450) • GHIR/L (W=7.0-8.3) (301)


±0.025
GIP-E (full radius) 7°
Precision Double-Ended Full Radius 15.3 Ref.
5
Inserts for Profiling and Grooving
W
M
R=W/2

Recommended
Dimensions Tough 1 Hard
Machining Data
IC8250


IC5010
IC830


IC808


IC428
IC807


ap f turn f groove
IC20


Designation W±0.02 R±0.05 M Tmax-r (mm) (mm/rev) (mm/rev)
GIP 3.00E-1.50 3.00 1.50 2.40 12.30 • • • • • 0.00-1.50 0.18-0.28 0.08-0.15
GIP 4.00E-2.00 4.00 2.00 3.20 11.80 • • • • • • • 0.00-2.00 0.20-0.34 0.10-0.20
GIP 5.00E-2.50 5.00 2.50 4.00 11.30 • • • • 0.00-2.50 0.25-0.42 0.13-0.23
GIP 6.00E-3.00 6.00 3.00 4.80 10.80 • • 0.00-3.00 0.27-0.54 0.15-0.27
GIP 6.35E-3.18 6.35 3.18 4.80 10.63 • • 0.00-3.10 0.29-0.57 0.16-0.29
• Dmin for internal machining = 70 mm • For cutting speed recommendations and user guide, see pages 340-351
For tools, see pages: C#-GHDR/L (233) • CGHN 26-M (302) • CGHN 32-DGM (304) • CGHN 32-M (303) • CGHN-D (239) • CGHN-DG (239) • CGHN-S (239)
• CGPAD (238) • CGPAD-JHP (238) • GHDR/L (short pocket) (233) • GHDR/L-JHP (short pocket) (234) • GHGR/L (235) • GHMPR/L (232) • GHMR/L (232) •
GHSR/L (312) • GHSR/L-JHP-SL (313)


250 ISCAR