Каталог Iscar отрезка 2022 - страница 154

Face Grooving and Turning Recommendations

Using Adapters for 3 mm Inserts Using Adapters for 4-6 mm Inserts

Recommended feed range for grooving with Grip 3... Recommended feed range in grooving with HFPR/L

and HGPL 3... inserts and HGAIR/L and HGAER/L inserts and HFAIR/L & HFAER/L adapters. adapters. Feed range changes according to adapter type. mm/rev 0.12 mm/rev 0.12 0.08 0.11 0.08 0.08 0.10 0.07 0.10 0.07 0.09 0.06 0.08 0.05 0.07 0.05 0.07 0.04 0.06

0.02 0.02 0.02 0.02 0.02 0.02

4 5 6 mm

40-60 40-60 40-80 40-80 40-80 m/min Width of Inserts (W)

Cutting Speed Vc Recommended depth of cut and feed range in turning HGAIR/L 12-3T6 with HFPR/L inserts and HFAIR/L & HFAER/L adapters. HGAER/L 12-3T6

Feed range changes according to adapter type.

HGAIR/L 14-3T7

HGAER/L 14-3T7 mm 2.5

HGAIR/L 17-3T8

HGAER/L 17-3T8

2.0

HGAIR/L 21-3T9

HGAER/L 21-3T9

1.5

HGAIR/L 25-3T9

1.0

Recommended depth of cut and feed range for turning

0.5

with HGPL 3... inserts with HGAIR/L and HGAER/L

adapters. Feed range changes according to adapter type.

0.05 0.1 0.15 0.2 0.25 mm/rev

mm Feed 1.2 HFAIR/L- ...4 1.0 HFAER/L- ...4

0.8 HFAIR/L- ...5

HFAER/L- ...5

0.6 HFAIR/L- ...6

HFAER/L- ...6

0.4 Note: In roughing, reduce feed when depth of cut is increased, ad increase feed at small depth of cut. 0.2

0.04 0.05 0.06 0.07 0.08 0.09 0.1 0.11 0.12 mm/rev

Feed HGAIR/L 21-3T9 HGAER/L 21-3T9 HGAIR/L 25-3T9

HGAIR/L 14-3T7

HGAER/L 14-3T7

HGAIR/L 17-3T8

HGAER/L 17-3T8

HGAIR/L 12-3T6

HGAER/L 12-3T6

Note: In roughing, increase feed at small depth of cut, and reduce feed at large depth of cut.