Каталог Iscar отрезка 2022 - страница 134
Навигация
Токарные инструменты Iscar (часть 1) 2026
Каталог Iscar монолитные фрезы 2022
Инструменты для обработки отверстий Iscar 2026
Каталог Iscar резьбонарезные фрезы
Каталог Iscar расточные системы
Каталог Iscar токарный инструмент 2017
FACE GROOVING
OAL
PICCO-010/610-N DAXN
(Face Grooving)
Inserts with Internal Coolant
Channel for Face Grooving a DCONMS
CW CDX
LU
Recommended
Dimensions
Machining Data
f face-groove
IC908
Designation DAXN(1) CW CDX DCONMS a LU OAL (mm/rev)
PICCO R 010.1006-10N 6.0 1.00 1.50 6.05 5.20 9.0 32.00 • 0.01-0.04
PICCO R 010.1506-10N 6.0 1.50 2.00 6.05 5.20 9.0 32.00 • 0.01-0.04
PICCO R 010.1008-10N 8.0 1.00 1.50 7.05 5.90 9.0 32.00 • 0.01-0.04
PICCO R 010.1008-20N 8.0 1.00 1.50 7.05 5.90 19.0 41.00 • 0.01-0.04
PICCO R 010.1008-30N 8.0 1.00 1.50 7.05 5.90 29.0 51.00 • 0.01-0.04
PICCO R 610.1008-10N 8.0 1.00 1.50 6.05 5.20 9.0 32.00 • 0.01-0.04
PICCO R/L 010.1508-20N 8.0 1.50 2.50 7.05 5.90 19.0 41.00 • 0.01-0.04
PICCO R 010.1508-10N 8.0 1.50 2.50 7.05 5.90 9.0 32.00 • 0.01-0.04
PICCO R 010.1508-30N 8.0 1.50 2.50 7.05 5.90 29.0 51.00 • 0.01-0.04
PICCO R 610.1508-10N 8.0 1.50 2.50 6.05 5.20 9.0 32.00 • 0.01-0.04
PICCO R 610.1508-20N 8.0 1.50 2.50 6.05 5.20 19.0 41.00 • 0.01-0.04
PICCO R/L 010.2008-30N 8.0 2.00 3.00 7.05 5.90 29.0 51.00 • 0.02-0.05
PICCO R 010.2008-10N 8.0 2.00 3.00 7.05 5.90 9.0 32.00 • 0.02-0.05
PICCO R 010.2008-20N 8.0 2.00 3.00 7.05 5.90 19.0 41.00 • 0.02-0.05
PICCO R 610.2008-10N 8.0 2.00 3.00 6.05 5.20 9.0 32.00 • 0.02-0.05
PICCO R 610.2008-20N 8.0 2.00 3.00 6.05 5.20 19.0 41.00 • 0.02-0.05
PICCO R 010.2508-10N 8.0 2.50 3.50 7.05 5.90 9.0 32.00 • 0.02-0.05
PICCO R 010.2508-20N 8.0 2.50 3.50 7.05 5.90 19.0 41.00 • 0.02-0.05
PICCO R 610.2508-10N 8.0 2.50 3.50 6.05 5.20 9.0 32.00 • 0.02-0.05
PICCO R 010.3008-10N 8.0 3.00 3.50 7.05 5.90 9.0 32.00 • 0.02-0.06
PICCO R 010.3008-20N 8.0 3.00 3.50 7.05 5.90 19.0 41.00 • 0.02-0.06
PICCO R 010.3008-30N 8.0 3.00 3.50 7.05 5.90 29.0 51.00 • 0.02-0.06
PICCO R 610.3008-10N 8.0 3.00 3.50 6.05 5.20 9.0 32.00 • 0.02-0.06
PICCO R 610.3008-20N 8.0 3.00 3.50 6.05 5.20 19.0 41.00 • 0.02-0.06
• Only right-hand inserts are available as standard • All inserts are with sharp corners • Solid tools are suitable for PICCO-N / PICCO ACE-N type holders only
• For detailed cutting data, see page 604
(1) Minimum axial grooving diameter
592 ISCAR
OAL
PICCO-010/610-N DAXN
(Face Grooving)
Inserts with Internal Coolant
Channel for Face Grooving a DCONMS
CW CDX
LU
Recommended
Dimensions
Machining Data
f face-groove
IC908
Designation DAXN(1) CW CDX DCONMS a LU OAL (mm/rev)
PICCO R 010.1006-10N 6.0 1.00 1.50 6.05 5.20 9.0 32.00 • 0.01-0.04
PICCO R 010.1506-10N 6.0 1.50 2.00 6.05 5.20 9.0 32.00 • 0.01-0.04
PICCO R 010.1008-10N 8.0 1.00 1.50 7.05 5.90 9.0 32.00 • 0.01-0.04
PICCO R 010.1008-20N 8.0 1.00 1.50 7.05 5.90 19.0 41.00 • 0.01-0.04
PICCO R 010.1008-30N 8.0 1.00 1.50 7.05 5.90 29.0 51.00 • 0.01-0.04
PICCO R 610.1008-10N 8.0 1.00 1.50 6.05 5.20 9.0 32.00 • 0.01-0.04
PICCO R/L 010.1508-20N 8.0 1.50 2.50 7.05 5.90 19.0 41.00 • 0.01-0.04
PICCO R 010.1508-10N 8.0 1.50 2.50 7.05 5.90 9.0 32.00 • 0.01-0.04
PICCO R 010.1508-30N 8.0 1.50 2.50 7.05 5.90 29.0 51.00 • 0.01-0.04
PICCO R 610.1508-10N 8.0 1.50 2.50 6.05 5.20 9.0 32.00 • 0.01-0.04
PICCO R 610.1508-20N 8.0 1.50 2.50 6.05 5.20 19.0 41.00 • 0.01-0.04
PICCO R/L 010.2008-30N 8.0 2.00 3.00 7.05 5.90 29.0 51.00 • 0.02-0.05
PICCO R 010.2008-10N 8.0 2.00 3.00 7.05 5.90 9.0 32.00 • 0.02-0.05
PICCO R 010.2008-20N 8.0 2.00 3.00 7.05 5.90 19.0 41.00 • 0.02-0.05
PICCO R 610.2008-10N 8.0 2.00 3.00 6.05 5.20 9.0 32.00 • 0.02-0.05
PICCO R 610.2008-20N 8.0 2.00 3.00 6.05 5.20 19.0 41.00 • 0.02-0.05
PICCO R 010.2508-10N 8.0 2.50 3.50 7.05 5.90 9.0 32.00 • 0.02-0.05
PICCO R 010.2508-20N 8.0 2.50 3.50 7.05 5.90 19.0 41.00 • 0.02-0.05
PICCO R 610.2508-10N 8.0 2.50 3.50 6.05 5.20 9.0 32.00 • 0.02-0.05
PICCO R 010.3008-10N 8.0 3.00 3.50 7.05 5.90 9.0 32.00 • 0.02-0.06
PICCO R 010.3008-20N 8.0 3.00 3.50 7.05 5.90 19.0 41.00 • 0.02-0.06
PICCO R 010.3008-30N 8.0 3.00 3.50 7.05 5.90 29.0 51.00 • 0.02-0.06
PICCO R 610.3008-10N 8.0 3.00 3.50 6.05 5.20 9.0 32.00 • 0.02-0.06
PICCO R 610.3008-20N 8.0 3.00 3.50 6.05 5.20 19.0 41.00 • 0.02-0.06
• Only right-hand inserts are available as standard • All inserts are with sharp corners • Solid tools are suitable for PICCO-N / PICCO ACE-N type holders only
• For detailed cutting data, see page 604
(1) Minimum axial grooving diameter
592 ISCAR