Каталог Iscar обработка канавок 2022 - страница 31
Навигация
Каталог Iscar монолитные концевые фрезы и система multi-master
Фрезерные инструменты Iscar 2026
Каталог Iscar сверла ружейные и для глубокого сверления 2022
Каталог Iscar токарные державки ISO 2022
Каталог Iscar инструмент для обработки алюминиевых колёс
| GHDR/L (long pocket) | LH | OAL | |||||||||||
| External Tools for Grooving, Turning and Parting | HF | H | |||||||||||
| HBH | WB | ||||||||||||
| WF | CDX CWN- | CWX | B | Right-hand | shown | ||||||||
| Designation | CWN(1) | CWX(2) | CDX(3) | H | B | OAL | WF | WB | LH | HBH | HF | ||
| GHDR/L 25-8 | 6.60 | 8.30 | 25.00 | 25.0 | 25.0 | 150.00 | 22.00 | 6.00 | 40.0 | 7.6 | 25.0 | SR M6X16 DIN912 | HW 5.0(a) |
| GHDR/L 3225-8 | 6.60 | 8.30 | 25.00 | 32.0 | 25.0 | 168.50 | 22.00 | 5.90 | 40.0 | - | 32.0 | SR M6X16 DIN912 | HW 5.0(a) |
| GHDR/L 25-812 | 6.60 | 8.30 | 12.00 | 25.0 | 25.0 | 140.00 | 22.00 | 5.90 | 33.0 | - | 25.0 | SR M6X16 DIN912 | HW 5.0(a) |
| GHDR/L 32-8 | 6.60 | 8.30 | 25.00 | 32.0 | 32.0 | 170.00 | 29.00 | 6.00 | 40.0 | - | 32.0 | SR M6X16 DIN912 | HW 5.0(a) |
| GHDL 32-812 | 6.60 | 8.30 | 12.00 | 32.0 | 32.0 | 160.00 | 29.00 | 5.90 | 33.0 | - | 32.0 | SR M6X16 DIN912 | HW 5.0(a) |
| GHDR/L 32-836 | 7.00 | 8.30 | 36.00 | 32.0 | 32.0 | 170.00 | 28.90 | 6.30 | 56.0 | 8.0 | 32.0 | SR M8X20DIN912 | HW 6.0(a) |
| GHDR/L 25-10 | 8.60 | 11.10 | 25.00 | 25.0 | 25.0 | 150.00 | 21.30 | 7.40 | 43.0 | 7.6 | 25.0 | SR M8X20DIN912 | HW 6.0(a) |
| GHDR/L 32-10 | 8.60 | 11.10 | 25.00 | 32.0 | 32.0 | 170.00 | 28.30 | 7.40 | 43.0 | - | 32.0 | SR M8X20DIN912 | HW 6.0(a) |
| GHDR/L 40-10 | 8.60 | 11.10 | 25.00 | 40.0 | 40.0 | 200.00 | 36.30 | 7.40 | 43.0 | - | 40.0 | SR M8X20DIN912 | HW 6.0(a) |
- For user guide, see pages 419-428, 432-436
(1) Minimum cutting width (2) Maximum cutting width (3) Cutting depth maximum (a) For optional key with limited tightening torque see page 428
For inserts, see pages: GDMF (288) GDMM-CC (583) GDMN (289) GDMU (290) GDMY (289) GDMY (full radius) (291) GDMY-F (291)
- GDPY (293)
- GIA-K (long pocket) (299)
- GIF (long pocket) (298)
- GIF-E (W=8,10 full radius) (294)
- GIF-E (W=8,10) (292)
- GIPA/GIDA 8 (full radius) (302)
| GHDR/L-JHP (long pocket) CUT-GRIP Tools with Channels for High-Pressure Coolant for Grooving and Turning | G 1/ O LH HF WF CWN-CWX CDX | 8"-28 typx2 AL | H B WB | Righ | t-hand shown Bar Max | |||
| Designation CWN(1) | CWX(2) | CDX(3) | H B | OAL | LH | WF | WB | HF |
| GHDL 32-8-JHP 6.60 | 8.30 | 25.00 | 32.0 32.0 | 170.00 | 55.5 | 29.00 | 6.00 | 32.0 |
| GHDR 32-8-JHP 6.60 | 8.30 | 25.00 | 32.0 32.0 | 170.00 | 55.0 | 29.00 | 6.00 | 32.0 |
- For user guide and accessories see pages 419-436
(1) Minimum cutting width (2) Maximum cutting width (3) Cutting depth maximum
For inserts, see pages: GDMF (288) GDMM-CC (583) GDMN (289) GDMU (290) GDMY (289) GDMY (full radius) (291) GDMY-F (291)
- GIA-K (long pocket) (299)
- GIF (long pocket) (298)
- GIF-E (W=8,10 full radius) (294)
- GIF-E (W=8,10) (292)
- GIPA/GIDA 8 (full radius) (302)
Flow Rate vs. Pressure
| Designation | 70 Bar Flow Rate(liters/min) | 100 Bar Flow Rate(liters/min) | 140 Bar Flow Rate(liters/min) | |
| GHDR/L 32-8-JHP | 13-16 | 19-21 | 22-24 | |
| pare Parts Designation | ||||
| GHDR/L 32-8-JHP | SR M6X25 DIN91 | 2 HW 5.0(a) PLG 1/8ISO1179 |
(a) For optional key with limited tightening torque see page 428
| GADR-8 | ||||||||||||||
| GHAR/L-8 External Holders for Groov and Turning Adapters | ing | GAFG | LH -L-8 | WF(assem | HF OHX bly) WF (holder) | O HB CDX | AL H H B GHAR | Right-hand s | hown | |||||
| Designation | H | HF | B | WF(1) | OAL | LH | OHX(2) | HBH TGA(3) | CDX(4) | FG(5) | ||||
| GHAR/L 25-8 | 25.0 | 25.0 | 25.0 | 16.0 | 124.50 | 45.0 | 25.50 | 14.0 GADR/L 8 | 25.50 | GAFG...R/L-8 | SR 14-519 | T-20/5 | SR M6X25 DIN912 | HW 5.0 |
| GHAR/L 32-8 | 32.0 | 32.0 | 32.0 | 23.0 | 144.50 | 45.0 | 25.50 | 7.0 GADR/L 8 | 25.50 | GAFG...R/L-8 | SR 14-519 | T-20/5 | SR M6X25 DIN912 | HW 5.0 |
- Adapters GADR/L-8 for turning and grooving, GAFG-R/L-8 for face-grooving (to be ordered separately)
(1) WF(holder) (2) Maximum overhang (3) Adapter for Turning & Grooving (4) See specific adapter dimensions (5) Adapter for Face Grooving
For tools, see pages: GADR/L-8 (286) GAFG-R/L-8 (580) PCADR/L 34N-RE (318)