Каталог Iscar обработка канавок 2022 - страница 17
Навигация
Каталог Iscar монолитные концевые фрезы и система multi-master
Фрезерные инструменты Iscar 2026
Каталог Iscar сверла ружейные и для глубокого сверления 2022
Каталог Iscar токарные державки ISO 2022
Каталог Iscar инструмент для обработки алюминиевых колёс
| OAH | OAL | ||||||||||
| TGPAD-JHP | HF | ||||||||||
| Adapters with Channels | LH | Bar Max | |||||||||
| for High-Pressure Coolant Carrying TGMF / TGMP Groove-Turn Inserts | WB2 | WB | CDX CW | WF | Left | -hand shown | |||||
| Designation | CWN(1) | CWX(2) | CDX(3) | WF | WB | WB2 | LH | OAL | HF | OAH | |
| TGPAD 3R/L-T9-JHP | 3.00 | 3.00 | 9.00 | 4.00 | 2.4 | 0 | 5.2 | 12.7 | 37.20 | 24.0 | 30.00 |
| TGPAD 4R/L-T16-JHP | 4.00 | 5.00 | 16.00 | 3.50 | 3.4 | 0 | 5.2 | 17.2 | 41.70 | 24.0 | 30.00 |
| TGPAD 5R/L-T16-JHP | 5.00 | 5.00 | 16.00 | 3.00 | 4.4 | 0 | 5.2 | 17.2 | 41.70 | 24.0 | 30.00 |
| TGPAD 6R/L-T22-JHP | 6.00 | 6.35 | 22.00 | 3.50 | 5.0 | 0 | 6.0 | 23.2 | 47.10 | 24.0 | 32.00 |
- For user guide, see pages 419-436
(1) Minimum cutting width (2) Maximum cutting width (3) Grooving depth is limited by the insert
For inserts, see pages: TGMF (full radius) (272) TGMF/P (272)
Flow Rate vs. Pressure
| Designation | 70 Bar Flow Rate (liters/min) | 100 Bar Flow Rate (liters/min) | 140 Bar Flow Rate (liters/min) |
| tgpad 3R/L-T9-JHP | 11-17 | 17-23 | 23-26 |
| tgpad 4R/L-T16-JHP | 20-25 | 25-31 | 31-34 |
| tgpad 5R/L-T16-JHP | 27-33 | 33-39 | 39-43 |
| tgpad 6R/L-T22-JHP | 30-35 | 35-41 | 41-44 |
| TGHN-D | OHN-OHX | CWN-CWX |
| Double-Ended Blades Carrying Utility Inserts for | H HF | |
| Grooving and Turning | ||
| OAL | WB |
| Designation | H | CWN(1) | CWX(2) | OHN(3) | OHX(4) | HF | OAL | WB | Insert |
| TGHN 26-3D | 26.0 | 3.00 | 3.00 | 10.0 | 15.0 | 21.4 | 110.00 | 2.40 | TGMF 3 |
| TGHN 26-4D | 26.0 | 4.00 | 5.00 | 10.0 | 15.0 | 21.4 | 110.00 | 3.20 | TGMF 4, TGMF/P 5 |
| TGHN 26-5D | 26.0 | 5.00 | 5.00 | 10.0 | 20.0 | 21.4 | 110.00 | 4.00 | TGMF/P 5 |
| TGHN 32-3D | 32.0 | 3.00 | 3.00 | 10.0 | 18.0 | 24.8 | 150.00 | 2.40 | TGMF 3 |
| TGHN 32-4D | 32.0 | 4.00 | 5.00 | 12.0 | 21.0 | 24.8 | 150.00 | 3.20 | TGMF 4, TGMF/P 5 |
| TGHN 32-5D | 32.0 | 5.00 | 5.00 | 12.0 | 26.0 | 24.8 | 150.00 | 4.00 | TGMF/P 5 |
| TGHN 32-6D | 32.0 | 6.00 | 6.35 | 16.0 | 26.0 | 24.8 | 150.00 | 5.20 | TGMF 6 |
- Use the drilled holes on blade for min. and max. overhang
- Grooving depth is limited by the insert
- For user guide, see pages 419-428, 432-436
(1) Minimum cutting width (2) Maximum cutting width (3) Minimum overhang (4) Maximum overhang
For inserts, see pages: TGMA (272) TGMF (full radius) (272) TGMF/P (272)
For holders, see pages: SGTBU/SGTBN (616) UBHCR/L (618)
| TGHN-S Single-Ended Blades Carrying Utility Inserts for Grooving and Turning | OAL WB CWN-CWX H HF OHN-OHX | ||||||
| Designation | H | CWN(1) | CWX(2) | OHN(3) OHX(4) HF | OAL | WB | Insert |
| TGHN 32-3S | 32.0 | 3.00 | 3.00 | 10.0 18.0 24.8 | 48.30 | 2.40 | TGMF 3 |
| TGHN 32-5S | 32.0 | 5.00 | 5.00 | 12.0 25.0 24.8 | 54.00 | 4.00 | TGMF/P 5 |
| TGHN 32-6S | 32.0 | 6.00 | 6.35 | 16.0 25.0 24.8 | 55.70 | 5.20 | TGMF 6 |
- Use the drilled holes on blade for min. and max. overhang
- Grooving depth is limited by the insert
- For user guide, see pages 419-428, 432-436
(1) Minimum cutting width (2) Maximum cutting width (4) Maximum overhang
For inserts, see pages: TGMA (272) TGMF (full radius) (272) TGMF/P (272)
For holders, see pages: C#-TBU (623) IM-TBU (633) UBHCR/L (618)