Каталог Iscar дисковые фрезы и фрезерные пластины 2022 - страница 74
Навигация
Каталог Iscar крепление инструмента
Каталог Iscar инструмент для обработки отверстий
Каталог Iscar резьбонарезные фрезы
Каталог Iscar инструмента для сверления
Каталог Iscar решения для глубокого сверления
| HSM90SFD-HSK A63/80-22 | LH LU | LF | Rd° | |||||||||
| 90° Endmills with Integral HSK Adaptation Carrying Super Positive Inserts for Machining Aluminum at High Rotation Speeds | 6 x M6 thre | aded hole | DC APMX s for bala | ncing screws | DCON | MS | G2.5 31,000 RP U | M | ||||
| Designation | DC | APMX | LU | LH | LF | CICT(1) | DCONMS | Shank | RMPX°(2) | RPMX(3) C | DI(4) | kg |
| HSM90SFD50-3-63A/80MQL-22 | 50.00 | 22.00 | 73.10 | 84.0 | 110.0 | 0 3 | 80.00 | HSK A63/80 | 7.0 | 31000 | 1 | 0.50 |
| HSM90SFD50-4-63A/80MQL-22 | 50.00 | 22.00 | 73.10 | 84.0 | 110.0 | 0 4 | 80.00 | HSK A63/80 | 7.0 | 31000 | 1 | 0.50 |
- A cooling tube must be used with all internal coolant HSK spindles (should be ordered separately)
- Important: When machining at very high cutting speeds and the insert needs replacing, it is also recommended to replace the screws
- Kit balancing screws should be ordered separately
- Insert tightening torque: 9 (Nxm)
(1) Number of inserts (2) Maximum ramping angle (3) Maximum RPM (4) 1 - Hole for data chip, 0 - Without hole for data chip
For inserts, see pages: HSM90S APCR 2207 (467)
Spare Parts
Designation
HSM90SFD-HSK A63/80-22 SR M5x0.8 20IP-13343 BLD IP20/M7 SW6-T-SH COOLING TUBE HSK A63