Каталог Iscar дисковые фрезы и фрезерные пластины 2022

		Tensile Strength	Hardness	Material	0.25-1.00	Lead( 1.25-1.50	mm) 1.75-2.00	2.50-6.00
ISO Material	Condition	[N/mm2]	HB	No.		Number o	fpasses
< 0.25 %C	Annealed	420	125	1
>= 0.25 %C	Annealed	650	190	2
Non-alloy steel and cast steel, < 0.55 %C	Quenched and tempered	850	250	3
free cutting steel	Annealed	750	220	4
>= 0.55 %C	Quenched and tempered	1000	300	5
	Annealed	600	200	6
P Low alloy and cast steel (less		930	275	7	1	1	2	3
than 5% of alloying elements)	Quenched and td	1000	300	8
	empere	1200	350	9
	Annealed	680	200	10
High alloyed steel, cast steel and tool steel	Quenched and tempered	1100	325	11
Stainless steel and cast steel	Ferritic/martensitic	680	200	12
	Martensitic	820	240	13
M Stainless steel	Austenitic, duplex	600	180	14	1	1	2	3
Grey cast iron (GG)	Ferritic/pearlitic		180	15
	Pearlitic /martensitic		260	16
K Nodular cast iron (GGG)	Ferritic		160	17	1	1	2	3
	Pearlitic		250	18
	Ferritic		130	19
Malleable cast iron	Pearlitic		230	20
Aluminum- wrought alloy	Not hardenable Hardenable		60 100	21 22
	Not hardenable		75	23	1	1	1	1
Aluminum-	Hardenable		90	24
cast, alloyed >12% Si	High temperature		130	25	1	1	2	3
N >1% Pb	Free cutting		110	26
Copper alloys	Brass		90	27
	Electrolytic copper		100	28
Non metallic	Duroplastics, fiber plastics			29	1	1	1	1
	Hard rubber			30
Fe based	Annealed		200	31
	Hardened		280	32
High temperature alloys Ni C	Annealed		250	33
S or o based	Hardened		350	34	2	2	2	3
	Cast		320	35
	Pure	400		36
Titanium alloys	Alpha+ beta alloys, hardened	1050		37
Hardened steel	Hardened		55 HRC	38
	Hardened		60 HRC	39
H Chilled cast iron	Cast		400	40	3	3	3	3
Cast iron	Hardened		55 HRC	41	2	2	2	3

Rm - ultimate tensile strength, MPa

Каталог Iscar дисковые фрезы и фрезерные пластины 2022 - страница 122