Каталог Iscar инструмента для сверления - страница 31

MM EA-CF
Interchangeable Solid Carbide Endmill Heads with Different Helix Rd°
for Machining Aluminum
l Ts
r ap

Dh6 D2

Haº
ALUMINUM
Recommended
Dimensions
Machining Data


IC08
fz
Designation D Flute ap r Ts D2 l H a° (mm/t)
MM EA080H08R0CF-4T05 8.00 4 8.00 0.00 T05 7.70 15.00 40.0 O 0.03-0.09
MM EA100H10R0CF-4T06 10.00 4 10.00 0.00 T06 9.60 19.00 40.0 O 0.03-0.10
MM EA120H12R0.2CF-3T08 12.00 3 12.00 0.20 T08 11.70 23.00 40.0 O 0.04-0.11
MM EA120H12R0CF-4T08 12.00 4 12.00 0.00 T08 11.70 23.00 40.0 O 0.04-0.11
• For shanks, see pages E20-23 • For clamping keys (should be ordered separately), tightening torques and clamping instructions, see page E20
• Do not apply lubricant to the threaded connection.


MM HC
Interchangeable Solid Carbide Slot Drill Milling Heads with Two 10° Helix Flutes Rd°


D2
Ts
Dh9
Ha°
r ap
l
ECONOMICAL SOLUTION
Recommended
Dimensions Tough ¥ Hard
Machining Data
IC908

IC903


fz
Designation D Flute ap r Ts D2 l Ha° Tm(1) (mm/t)
MM HC078C08R0.2-2T05 7.80 2 7.70 0.20 T05 7.60 10.00 10.0 r0-2.0 O 0.03-0.09
MM HC080C08R0.4-2T05 8.00 2 7.70 0.40 T05 7.60 10.00 10.0 r0-2.0 O O 0.03-0.09
MM HC080C08R1.0-2T05 8.00 2 7.70 1.00 T05 7.60 10.00 10.0 r0-2.0 O O 0.03-0.09
MM HC080C08R2.0-2T05 8.00 2 7.70 2.00 T05 7.60 10.00 10.0 r0-2.0 O O 0.03-0.09
MM HC098C10R0.3-2T06 9.80 2 9.00 0.30 T06 9.60 12.35 10.0 r0-3.0 O 0.03-0.10
MM HC100C10R0.4-2T06 10.00 2 9.00 0.40 T06 9.60 12.35 10.0 r0-3.0 O O 0.03-0.10
MM HC100C10R1.0-2T06 10.00 2 9.00 1.00 T06 9.60 12.35 10.0 r0-3.0 O O 0.03-0.10
MM HC100C10R2.0-2T06 10.00 2 9.00 2.00 T06 9.60 12.35 10.0 r0-3.0 O O 0.03-0.10
MM HC117C13R0.3-2T08 11.70 2 10.00 0.30 T08 11.50 14.20 10.0 r0-3.0 O 0.04-0.11
MM HC120C13R0.4-2T08 12.00 2 10.00 0.40 T08 11.50 14.20 10.0 r0-3.0 O O 0.04-0.11
MM HC120C13R1.0-2T08 12.00 2 10.00 1.00 T08 11.50 14.20 10.0 r0-3.0 O O 0.04-0.11
MM HC120C13R2.0-2T08 12.00 2 10.00 2.00 T08 11.50 14.20 10.0 r0-3.0 O O 0.04-0.11
MM HC.500C55R016-2T08 12.70 2 11.00 0.40 T08 11.50 15.25 10.0 r0-3.2 O 0.04-0.11
MM HC140C11R0.4-2T08 14.00 2 11.60 0.40 T08 11.50 15.05 10.0 r0-4.0 O 0.04-0.12
• For shanks, see pages E20-23 • For clamping keys (should be ordered separately), tightening torques and clamping instructions, see page E20
• Do not apply lubricant to the threaded connection.
(1) Specially tailored radius range, available upon request.


E4 ISCAR
Заказ инструмента: http://steelcam.org
8 (343) 382-52-03 | sales@sverla-ekb.ru