Каталог Iscar инструмент для внутренней обработки - страница 80
Навигация
Каталог Iscar инструментальные блоки
Фрезерные инструменты Iscar 2026
Каталог Iscar обработка канавок 2022
Каталог Iscar инструмент для нарезания резьбы
Токарные инструменты Iscar (часть 2) 2026
VCET-WF
35° Rhombic Wiper Inserts for Finishing Operations at High Feeds
93º 91° 52° max 50º max 35°
87° WF
93° 50° max
di R d1
0.30.3 7° rr r l S
Right-hand shown Left-hand shown Recommended Dimensions Tough ¥ Hard Machining Data
ap f
| Designation | l | di | S | r | d1 | (mm) | (mm/rev) |
| VCET 1103005R/L-WF | 11.10 | 6.35 | 3.18 | 0.05 | 2.90 | O O 0.05-4.00 | 0.01-0.20 |
| For tools, see pages: PVACR/L-JHP (A98) • PVACR/L-S (A98) • S/A-SVJCR/L (B37) • SVACR/L (A99) • SVJCR/L (A99) . | |||||||
| VCMT-F3P | |||||||
| 35° Rhombic Positive Flank Inserts, for Semi-Finishing and Finishing | |||||||
| Turning of Steel |
52° 72.5° 70°
91° 93° 50° max
max max
35° 25°
| 31° | max | 93º | |
| 112° | max |
| d | 117.5° | 50º | |||||
| di | 1 | max | |||||
| 7° | 107.5º | ||||||
| r | 95º | ||||||
| l | S |
48º 35º 95º
max max
Recommended Dimensions Tough ¥ Hard Machining Data
ap f
| Designation | l | di | S | r | d1 | (mm) | (mm/rev) | ||
| VCMT 110302-F3P | 11.10 | 6.35 | 3.18 | 0.20 | 2.80 | O | O | 0.06-1.70 | 0.03-0.14 |
| VCMT 110304-F3P | 11.10 | 6.35 | 3.18 | 0.40 | 2.80 | O | O | 0.10-1.70 | 0.05-0.20 |
| VCMT 110308-F3P | 11.10 | 6.35 | 3.18 | 0.80 | 2.80 | O | O | 0.13-1.70 | 0.07-0.28 |
| VCMT 110312-F3P | 11.10 | 6.35 | 3.18 | 1.20 | 2.80 | O | O | 0.13-1.70 | 0.08-0.33 |
For tools, see pages: PVACR/L-JHP (A98) • PVACR/L-S (A98) • S/A-SVJCR/L (B37) • SVACR/L (A99) • SVJCR/L (A99) • SVVCN (A100) .
VCMT-SM
35° Rhombic 7° Positive Flank Inserts for Semi-Finish and Finish Turning on Soft
Materials and Exotic Alloys
| 91° | 52° | 72.5° | 70° | ||
| max | 93° | 50° | max | ||
| max | |||||
| 35° | 25° | 93º | |||
| 31° | max | ||||
| max | |||||
| 112° | |||||
| d | 117.5° | 50º | |||
| 1 di | max | ||||
| 7° 95º | 107.5º | ||||
| r | |||||
| S l | |||||
| 48º | 35º | 95º |
max max
Recommended Machining Dimensions Tough ¥ Hard Data
ap f
| Designation | l | di | S | r | d1 | (mm) | (mm/rev) | |||||
| VCMT 110302-SM | 11.10 | 6.35 | 3.18 | 0.20 | 2.90 | O | O | O | 0.20-2.50 | 0.04-0.20 | ||
| VCMT 110304-SM | 11.10 | 6.35 | 3.18 | 0.40 | 2.90 | O | O | O | O | O | 0.50-3.00 | 0.07-0.24 |
| VCMT 110308-SM | 11.10 | 6.35 | 3.18 | 0.80 | 2.90 | O | 0.50-2.00 | 0.07-0.25 |
For tools, see pages: PVACR/L-JHP (A98) • PVACR/L-S (A98) • S/A-SVJCR/L (B37) • SVACR/L (A99) • SVVCN (A100).