Каталог Iscar инструмент для мелкоразмерной обработки - страница 99

Предыдущая страница Следующая страница

Навигация

PENTA 24R/L-Z

Insert with 5 Cutting Edges, for Parting of Tubes, Small and Thin-Walled Parts

±0.0424 TRH fa˚ W R 4fa˚ LH
DimensionsRecommended Machining Data
Designation Wfa°RDmaxIC1008f groove (mm/rev)
PENTA 24R/L150Z06D 1.506.00.0610.0�0.03-0.09
PENTA 24R/L150Z15D 1.5015.00.0610.0�0.03-0.08
PENTA 24R/L200Z06D 2.006.00.1012.8�0.04-0.10
PENTA 24R/L200Z15D 2.0015.00.1012.8�0.04-0.09
PENTA 24R/L300Z06D 3.006.00.2012.8�0.04-0.13
PENTA 24R/L300Z15D 3.0015.00.2012.8�0.04-0.12
  • Cutting edge with high positive rake, suitable for parting of tubes, thin walled parts and for small diameters
  • Suitable for machining soft materials and bearing

steel at low to medium feeds For tools, see pages: PCHBR/L (A43) PCHPR/L (A42) PCHR/L-24 (A41) PCHR/L-24-JHP (A41).

Dmax asa FunctionØDmax of PartingTmax / GroovingØDmax Depth (T) for PENTA 24 Inserts
W±0.02Tmax (1)Tmax/ DmaxT≤3.0T≤3.5T≤4.0T≤4.5T≤5.0T≤5.5T≤6.0T≤6.2T≤6.4
W=0.501.01.0 / N.L.---------
W=0.502.52.5 / N.L.---------
W=0.801.61.6 / N.L.---------
W=1.003.5N.L.250-------
1.04≤W≤1.402.02.0 / N.L.---------
W=1.472.52.5 / N.L.---------
W=1.505.0N.L.4702107030----
1.57≤W≤1.963.0N.L.--------
W=2.006.0(2)N.L.470210130754520--
2.22≤W≤2.303.5N.L.250-------
2.39≤W≤2.505.0N.L.4702107030----
2.70≤W≤3.186.2N.L.470210135100704020-
3.19≤W≤3.746.4N.L.3501801158052322620
3 75≤W≤4 006 2N.L.35018011580623218-