Каталог Iscar инструмент для мелкоразмерной обработки - страница 98

PENTA 24R-P
Parting Inserts with 5 Cutting Edges, for Soft Materials, Thin Walls and Miniature Parts

Tmax R ±0.04
Tmax-r 24
fa˚ fa˚
12°
Dmax

R.H. L.H.
Recommended
Dimensions
Machining Data


IC1008
f groove
Designation W±0.02 R fa° D max(1) (mm/rev)
PENTA 24R100P06D 1.00 0.05 6.0 7.2 O 0.02-0.04
PENTA 24R100P15D 1.00 0.05 15.0 7.2 O 0.02-0.03
PENTA 24R150P06D 1.50 0.05 6.0 11.0 O 0.02-0.05
PENTA 24R150P15D 1.50 0.05 15.0 11.0 O 0.02-0.04
PENTA 24R200P06D 2.00 0.05 6.0 12.6 O 0.02-0.07
PENTA 24R200P15D 2.00 0.05 15.0 12.6 O 0.02-0.05
(1) For grooving and parting depth relative to part diameter, see page (A85)

For tools, see pages: • PCHBR/L (A43) • PCHPR/L (A42) • PCHR/L-24 (A41) • PCHR/L-24-JHP (A41).


PENTA 24N-Z
Insert with 5 Cutting Edges, for Grooving and Parting of Tubes, Small and Thin-Walled Parts
W ±0.04
R
T 24


4
Recommended
Dimensions
Machining Data
IC908


f groove
Designation W±0.02 R Tmax-r(1) (mm/rev)
PENTA 24N150Z010 1.50 0.10 5.00 O 0.05-0.08
PENTA 24N200Z020 2.00 0.20 6.40 O 0.04-0.12
PENTA 24N300Z020 3.00 0.20 6.40 O 0.04-0.16
• Cutting edge with high positive rake, suitable for parting of tubes, thin walled parts and for small diameters • Suitable for machining soft materials and bearing
steel at low to medium feeds
(1) For grooving and parting depth relative to part diameter, see page (A85)

For tools, see pages: • PCHBR/L (A43) • PCHPR/L (A42) • PCHR/L-24 (A41) • PCHR/L-24-JHP (A41).


A80 ISCAR
Заказ инструмента: http://steelcam.org
8 (343) 382-52-03 | sales@sverla-ekb.ru