Ручные и измерительные инструменты Hoffmann Group 2026 - страница 343

GBP 57 ​ Abrasive sleeve holders conical Slotted, resilient rubber body with steel shank. Ground outer face for best concentricity. _20×63 largest ⌀×head length mm 20×63 29×30 36×60 55 3830 Abrasive sleeve holder slit, conical shank 6 mm ⌀ eShop eShop eShop 5 52E smallest ⌀ mm 14 22 22 ​ _29×30 maximum speed min-1 21000 21000 13500 ​ ​ Abrasive sleeves conical Made of non-tearing, synthetic resin bonded material with long service life and good grit adhesion. The rubber body of the abrasive sleeve holder expands at high speed to hold the abrasive sleeve in place. The full width of the sleeve can be used, it does not slip and can be replaced quickly and easily (twist in the direction of slots when fitting/removing). Only compatible with abrasive sleeve holders. 55 3850–3870 – Aluminium Oxide (A) for general-purpose grinding work. 55 3871/3873 – Zirconium Aluminium Oxide (ZA). 55 3875/3877 – Ceramic grit (CER). Suitable for: Abrasive sleeve holder No. 553830. Application: Abrasive sleeves are predominantly used for surface grinding tasks which require the removal of large amounts of material − even at sharp edges. 55 3850–​55 3870 55 3871/​3873 ● ● ● ● ● ● ● ○ ● ○ ○ ○ ○ ○ ● ● ● ○ ○ ● ● 55 55 3875/​3877 ○ ● ● ● ● ● ● ● ● ● ● largest sleeve ⌀× sleeve width mm 20×63 29×30 36×60 Abrasive sleeve, conical (A) 40 grit 55 3850 eShop eShop eShop 50 52E coarse Abrasive sleeve, conical (A) 80 grit 55 3860 eShop eShop eShop 50 A 52E medium Abrasive sleeve, conical (A) 150 grit 55 3870 eShop eShop eShop 50 52E fine _20 × 63 Abrasive sleeve, conical (ZA), 40 grit 55 3871 eShop – – 50 52E coarse ZA Abrasive sleeve, conical (ZA), 80 grit 55 3873 eShop – – 50 52E medium Abrasive sleeve, conical (CER) 40 grit 55 3875 eShop – – 50 52E coarse CER Abrasive sleeve, conical (CER) 80 grit 55 3877 eShop – – 50 52E medium _29 × 30 ​ Abrasive rolls 55 3880–​55 3895 ● ● ● ● ○ ○ ○ ● ● ○ ● Abrasive roll holder Abrasive roll holder with 6 mm shank ⌀ to take abrasive rolls No. 553880 ff. 55 3835 Mounting-⌀×Overall length mm 3×63 3×70 5×85 55 3835 Abrasive roll holder 6 mm shank ⌀ eShop eShop eShop 5 52E Abrasive rolls A Abrasive roll consisting of wound abrasive cloth with Aluminium Oxide (A). 55 3880 55 3880/3885 – Cylindrical form. 55 3890/3895 – Conical shape for restricted places. Suitable for: Abrasive roll holder No. 553835. 55 3890 Abrasive roll ⌀× abrasive roll length mm 10×25 6×38 10×38 13×38 20×38 Abrasive roll, cylindrical (A) 80 grit 55 3880 – eShop eShop eShop eShop 50 52E medium Abrasive roll, cylindrical (A) 150 grit 55 3885 – eShop eShop eShop – 50 52E fine Abrasive roll, conical (A) 80 grit 55 3890 eShop – – eShop – 50 52E medium Abrasive roll, conical (A) 150 grit 55 3895 eShop – – – – 50 52E fine maximum speed min-1 26000 26000 26000 26000 18000 ​ Suitable for: 3×63 3×63 3×70 3×70 5×85 ​ Holder mounting ⌀ × overall length 343