Ручные и измерительные инструменты Hoffmann Group 2026 - страница 342

GBP 57 ​ Abrasive sleeve holders cylindrical Slotted, resilient rubber body with steel shank. Ground outer face for best concentricity. Head ⌀×head length mm 15×30 10×20 22×20 30×20 30×30 45×30 60×30 55 3600 Abrasive sleeve holder, slit, shank ⌀ 6 mm eShop ■ eShop ■ eShop ■ eShop ■ eShop ■ eShop ■ eShop ■ 5 52E minimum speed min -1 25000 38000 18000 13000 13000 9000 6500 ​ maximum speed min-1 36000 55000 26000 19100 19100 12700 9500 ​ ​Abrasive sleeves and abrasive flap sleeves The rubber body of the abrasive sleeve holder expands at high speed to hold the abrasive sleeve in place. The full width of the sleeve can be used, it does not slip and can be replaced quickly and easily (twist in the direction of slots when fitting/removing). Only compatible with abrasive sleeve holders. Suitable for: Abrasive sleeve holder No. 553600. Application: Abrasive sleeves are predominantly used for surface grinding tasks which require the removal of large amounts of material − even at sharp edges. ​ 55 3700–​55 3740 ● ● ○ ○ ○ ○ ● ● ● ● 55 55 3760/​3780/​3820 55 3790/​3795 ○ ● ○ ● ● ● ● ○ ● ● ● ● ○ ● ● ● ● ● ● ● ● Abrasive sleeves cylindrical ​ Made of non-tearing, synthetic resin bonded material with long service life and good grit adhesion. Unsuitable for use with cooling lubricants. A ZA CER 55 3700–3740 – Aluminium oxide (A). 55 3760/3780 – Zirconium Aluminium Oxide (ZA). 55 3790/3795 – Ceramic grit (CER). Sleeve ⌀×Width of sleeve mm 10×20 15×30 22×20 30×20 30×30 45×30 60×30 Abrasive sleeve (A) 40 grit 55 3700 eShop eShop ■ eShop eShop eShop eShop eShop ■ 50 52E coarse Abrasive sleeve (A) 60 grit 55 3710 eShop eShop ■ eShop ■ eShop ■ eShop eShop eShop 50 52E medium coarse Abrasive sleeve (A) 80 grit 55 3720 eShop ■ eShop ■ eShop eShop ■ eShop eShop eShop ■ 50 52E medium Abrasive sleeve (A) 150 grit 55 3740 eShop ■ eShop ■ eShop eShop ■ eShop eShop eShop ■ 50 52E fine Abrasive sleeve (ZA) 36 grit 55 3760 – eShop eShop eShop eShop eShop eShop 50 52E coarse Abrasive sleeve (ZA) 80 grit 55 3780 – eShop eShop eShop eShop eShop eShop 50 52E medium Abrasive sleeve (CER), 40 grit 55 3790 – – – – eShop eShop eShop 50 53L coarse Abrasive sleeve (CER), 60 grit 55 3795 – eShop – – eShop eShop eShop 50 53L medium Abrasive flap sleeves cylindrical ​ ZA Densely packed around a stable core abrasive strips of Zirconium Aluminium Oxide (ZA) fabric. Due to the even wear of the individual abrasive strips, new abrasive fabric is constantly being exposed, thus increasing the service life and material removal rate several-fold. Application: For aggressive surface grinding work as an alternative to sander bands and flap wheels. For use exclusively in the direction of rotation of the support body. The direction of rotation is marked on the core of the sleeve. Sleeve ⌀×Width of sleeve mm 30×30 45×30 60×30 Abrasive flap sleeve (ZA) 40 grit 55 3820 eShop eShop eShop 10 52E coarse External ⌀ mm 45 60 75 ​ maximum speed min-1 19100 12700 9500 ​ 342