Ручные и измерительные инструменты Hoffmann Group 2026 - страница 328

GBP 57 ​Burrs for deburring work 6mm 8mm 54 1000 Size AF0627 – Deburring head with guide face, without cutter at the tip. ⌀ ⌀ Size MN1225 – Combination of pointed cone and angle for deburring and chamfering inner and outer edges. Special tooth geometry for optimum guidance even on sharp edges. Size R0812 – Deburring head (external) with flat tip on the head and radius for edge rounding. Size J1010–J1613 – Conical shape for countersinking and chamfering. Size T1610/6; T1610/8 – Deburring head (internal) with left-hand helical toothing and 45° angle for chamfering. Size R1015; R1315 – Deburring head (external) with radius for edge rounding. Note: Reduced speed for burrs with an overall length of 120 mm: maximum 11,000 rpm Type AF0627 NS1230 K1230 MN1225 T1610/6 T1610/8 54 1000 Burr Carbide eShop – – eShop eShop eShop 51D Burr Z3 − medium 54 1200 HSS 52D – eShop eShop – – – with chip breaker Tooth type abbreviation – Z3 Z3 – – – Cylindrical with Angle Shape description club deburring deburring deburring 54 Head ⌀ mm guide face 6 with end cut 12 12 12 16 16 Head length mm 27 30 30 25 10 10 Overall length mm 60 70 70 70 70 120 Shank ⌀ mm 6 6 6 6 6 8 Angle degrees – 8 – – 45 45 Type R0812 R1015 R1315 J1010 J1013 J1613 54 1000 Burr Carbide eShop eShop eShop eShop eShop eShop 51D Shape description deburring deburring deburring countersink countersink countersink Head ⌀ mm 8 10 13 10 10 16 Head length mm 12 15 15 10 13 13 Overall length mm 52 55 55 50 53 53 Shank ⌀ mm 6 Angle degrees – – – 90 60 90 Radius mm 2.5 8 10 – – – ​ Carbide burrs for shaping plastics (CRP/GRP) 3mm 6mm ⌀ ⌀ ​ Z P plastic ● The special tooth geometry generates reduced cutting forces and avoids frayed fibres. Cylindrical shape (ZYA). Cutter geometry ideal for hard CRP/GRP with fibre content > 40 %. Application: Side milling, contour milling and deburring (especially of fibre-reinforced plastics). Type AS0315 AS0625 Burr, fine 54 7330 Carbide – eShop 51D Tooth configuration P – plastic Burr, coarse 54 7340 Carbide eShop eShop 51D Tooth configuration P – plastic End face profile Two-flute end face cut Head ⌀ mm 3 6 Head length mm 15 25 Overall length mm 43 64 Shank ⌀ mm 3 6 328