Режущие и зажимные инструменты Hoffmann Group 2026 - страница 1149

Adapter plate for indexed clamping pots

Application: For adapting a centric clamping device to indexed clamping pots.

Note: For securing all clamping devices with pitch 52 mm and 96 mm, for adapting to an indexed clamping pot. Not suitable for Xtric No. 363000 125L and XL!

Unterseite Xtric

Mounting hole 18M12 suitable for colour code 36 3080_125/120

Closure stud

36 0029 – Circular cover with seal covers the complete clamping pot including the closure stud.

Application: To protect unused clamping points against dirt and swarf.

_120C _120

Clamping studs

With internal thread including a suitable threaded pin.

Type 12M10/90 14M12/90 16M8 16M10 18M12 12M10 18M16 25M10 D

36 0025 ZeroClamp clamping stud M

eShop eShop eShop eShop eShop eShop eShop eShop 1

with internal thread

• D mm 12 14 16 16 18 12 18 25

2

suitable for clamping pot mm 90 90 120 120 120 120 120 120

M

Type 12M10/138 18M12/138 25M10/138 25M16/138 18M16/138 2

36 0025 ZeroClamp clamping stud

eShop eShop eShop eShop eShop

with internal thread

• D mm 12 18 25 25 18

1

Alignment sets

Application: For parallel alignment in the T-slots. d = 35

12/40 14/40 14/50 16/40 18/40 22/40 BU = 3

Slot width B / Clamping thickness S mm

36 0015 ZeroClamp alignment set (eShop) (eShop) (eShop) (eShop) (eShop) (eShop)

Alignment set 25 h7 Closure studs S Centring set

Connection blocks B Clamping studs d = 35 Quick connect

Centring set

Application: For centralised alignment in the centre bore. For basic units with 40 - 50 mm thickness.

36 0015

36

BU = 3