Производственная мебель и системы хранения Hoffmann Group 2026 - страница 555

GBP 57 200 kg 100% 26G 25 20G CNC auxiliary cabinet 60×28 G Tool auxiliary cabinet in 60×28G, with drawers 26×20G. With sliding doors, centrally lockable by slide handle with cylinder lock, raised edge on 3-sides and ribbed rubber mat. No anti-tilt device. Drawers and pull-out shelves can be installed in both cabinet halves, without a centre partition. 100% full extension drawers with differential runners. Load capacity for drawers and pull-out shelves 200 kg. Drawers with slots at 25 mm intervals to take slotted dividers. Colour: Body, pull-out shelves and drawer cabinet body RAL 7035 light grey, doors and drawer fronts RAL 7016 anthracite powder-coated. Drawer body not configurable, always RAL 7035 light grey. Note: For storage of tools, a drawer inlay No. 970708 is required. 97 0755_1025/4 97 0755_1025/6 Height mm / Type 1025/4 1025/6 Installation in the right-hand half of the cabinet. Drawers and pull-out shelves can also be installed 97 0755 9GK CNC auxiliary cabinet with drawers 26×20G (eShop) (eShop) in the left-hand half of the cabinet. Height mm 1025 Width mm 1500 Depth mm 700 Usable height mm 875 Drawer usable width mm 650 Drawer usable depth mm 500 Drawer usable width in G 26 Drawer usable depth in G 20 Weight kg 175 205 Fitted with: 2 Number of drawers (No. 930635 size 75) Number of pull-out shelves (No. 930656 size 75) 2 4 200 kg 100% 26G 25 24G CNC tool cabinets 30×28 G Completely equipped tool cabinet in 30×28G, with drawers 26×24G. Cabinet can be centrally locked by a cylinder lock. Cabinet can be centrally locked by a cylinder lock. With raised edge on 3 sides and ribbed rubber mat. 100% full extension drawers with differential runners. Drawers with slots at 25 mm intervals 97 to take slotted dividers (from drawer front height 75 mm). An anti-tilt device prevents more than one drawer being opened at one time. Drawer 50 mm with 75 kg load capacity. Drawers from 75 mm with 200 kg load capacity. Colour: Body and drawer cabinet body RAL 7035 light grey, drawer fronts RAL 7016 anthracite powder-coated. Drawer body not configurable, always RAL 7035 light grey. Note: For storage of tools, a drawer inlay No. 970705 is required. 97 0785_1025/4 Height mm / number of drawers 1025/3 1025/4 1275/5 97 0785 9GK CNC tool cabinet complete with drawers 26×24G (eShop) (eShop) (eShop) Width mm 750 Depth mm 700 Usable height mm 900 900 1150 Drawer usable width mm 650 Drawer usable depth mm 600 Drawer usable width in G 26 Drawer usable depth in G 24 Weight kg 144 125 150 97 0785_1025/3 97 0785_1025/4 97 0785_1275/5 555