Общий каталог Dijet 2018 - страница 7

About Safety When Using Cutting Tool Products Warning Counter plan If cutter lacks dynamic balance, tool breakage or dispersi- 1. Please use them in the area of recommended cutting on of broken pieces may occur by vibration. condition. (See our catalogue or instruction) Milling 2. Rotating portion and dynamic balancing should be periodi- Cutters and cally checked to prevent from eccentric rotation or run out due to wear of bearing portion. Other Milling tools Caution Counter plan Since milling cutter have sharp edges, direct contact with Please equip safety items such as safety glasses and protec- tive gloves. bare hands may cause injury. Warning Counter plan When drilling through hole with turning work, a kind of disk Please equip safety items such as safety glasses, protective (reminder parts) sometimes flies out from the end of frilling gloves, andcovers at the chucking. very fast. It’s very dangerous since the disc has sharp Drills edge. Caution Counter plan Some micro drills have sharp edge with the top. Direct Please equip safety items such as safety glasses and protec- tive gloves. touch to tools may cause injury. Warning Counter plan When brazing is carried out again and again, the strength Carbide tools which is brazed several times should not be of carbide insert is deteriorated and becomes easy to be used because its strength has deteriorated. broken during cutting. Brazed Tools Caution Counter plan Dispersion of broken inserts by tools breakage or falling 1. Please confirm they are firmly brazed. off body may cause injury. 2. Please don’t use brazed tools in the condition that requires high cutting temperature. Warning Counter plan Others It is dangerous to use tools except for the fixed applica- Please use them in the area of our recommended cutting tion. It may cause damdage of tool and machine. condition. (see our catalogue or instruction) 5