Каталог ARNO монолитный осевой инструмент - страница 164

Recommended cutting data Solid carbide end-mill AFG


Brinell hardness HB

Tensile strength Rm
Cutting speed


Correction factor
Vc (m/min)
Material


Chipping group
Structure of the material groups
group


and identification letters


(N/mm²)


TiAlN
VHM
C ≤ 0.25 % annealed 125 428 P1 1,2 100 - 170 - 240
C > 0.25 … ≤ 0.55 % annealed 190 639 P2 1,2 100 - 170 - 240
C > 0.25 … ≤ 0.55 % hardened and tempered 210 708 P3 1,2 90 - 155 - 220
Unalloyed steel
C > 0.55 % annealed 190 639 P4 1,2 100 - 170 - 240
C > 0.55 % hardened and tempered 300 1013 P5 1,0 60 - 100 - 140
Machining steel (short-chipping) tempered 220 745 P6 1,2 100 - 170 - 240
annealed 175 591 P7 1,2 90 - 145 - 200
P Low alloyed steel
hardened and tempered
hardened and tempered
300
380
1013
1282
P8
P9
1,0
0,8
90 - 145 - 200
60 - 90 - 120
hardened and tempered 430 1477 P10 0,8 60 - 90 - 120
annealed 200 675 P11 1,2 90 - 145 - 200
High alloyed steel and
high alloyed tool steel
hardened 300 1013 P12 1,0 80 - 110 - 140
hardened 400 1361 P13 0,8 60 - 85 - 110
AFG


ferritic / martensitic, annealed 200 675 P14 1,0 50 - 85 - 120
Stainless steel
martensitic, hardened and tempered 330 1114 P15 0,9 30 - 55 - 80
austenitic, chilled 200 675 M1 1,0 60 - 90 - 120
M Stainless steel austenitic, precipitation-hardened (PH)
austenitic-ferritic, Duplex
300
230
1013
778
M2
M3
0,9
1,0
30 - 55 - 80
50 - 85 - 120
ferritic 200 675 K1 -
Malleable cast iron
pearlitic 260 867 K2 -
low tensile strength 180 602 K3 -
K
Cast iron
high tensile strength / austenitic 245 825 K4 -
Cast iron with nodular ferritic 155 518 K5 -
graphite pearlitic 265 885 K6 -
GGV (CGI) 200 675 K7 -
Aluminium alloys not heat treatable 30 - N1 -
long chipping heat treatable, heat treated 100 343 N2 -
≤ 12 % Si, not heat treatable 75 260 N3 -
Casted aluminium alloys ≤ 12 % Si, aushärtbar, ausgehärtet 90 314 N4 -
> 12 % Si, not heat treatable 130 447 N5 -
Magnesium alloys 70 250 N6 -
Unalloyed, elektrolyte copper 100 343 N7 -
N Copper and copper alloys Brass, Bronze 90 314 N8 -
(Brass / Bronze) Cu-alloys, short-chipping 110 382 N9 -
High-tensile, Ampco 300 1013 N10 -
Lead alloys (without abrasive filling material) - - N11 -
Duroplastic (without abrasive filling material) - - N12 -
Plastic glas fibre reinforced GFRP - - N13 -
Non-ferrous materials
Plastic carbon fibre reinforced CFRP - - N14 -
Plastic aramid fibre reinforced AFRP - - N15 -
Graphite (tech.) 80 Shore - N16 -
annealed 200 675 S1 -
Fe-Basis
heat treated 280 943 S2 -
High temperature
resistant alloys
annealed 250 839 S3 -
Ni- or Co-alloyed heat treated 350 1177 S4 -
S
casting 320 1076 S5 -
Pure titan 200 675 S6 -
Titanium alloys α- and β-alloys, heat treated 375 1262 S7 -
β-alloys 410 1396 S8 -
Wolfram alloys 300 1013 S9 -
Molybdän alloys 300 1013 S10 -
hardened 50 HRC - H1 0,7 20 - 70 - 120
H
Hardened steel hardened 55 HRC - H2 0,7 20 - 70 - 120
hardened 60 HRC - H3 1,1 12 - 36 - 60
Hardened cast iron hardened 55 HRC - H4 0,7 20 - 70 - 120
The recommended cutting data are only approximate values. It may be necessary to adjust them to each individual machining application.

164 VHM- / PM-HSS Werkzeuge | Solid carbide- / PM-HSS Tools | Outils carbure monobloc / PM-HSS Alle Angaben in mm / Dimensions in mm / Toutes les dimensions en mm