Общий каталог Widia 2017 - страница 1645

• Table of Contents
• Turning
• Turning • ISO Inserts
• Turning • Tools for External Turning and Internal Boring
• Turning • Tools for External Turning and Internal Boring
• Turning • Tools for Small Hole Boring
• com E1Turning • Grooving and Cut-Off
• Turning • Threading
• Indexable Milling
• Indexable Milling • Face Mills
• Indexable Milling • Chamfer Mills
• Indexable Milling • 90° Shoulder Mills
• Indexable Milling • Helical Mills
• Indexable Milling • Slotting Mills
• Indexable Milling • Copy Mills
• Solid End Milling
• Solid End Milling • High-Performance Solid Carbide End Mills
• Solid End Milling • General Purpose Solid Carbide End Mills
• Solid End Milling • High-Performance High-Speed Steel (HSS-E/PM)
• Solid End Milling • Burs
• Holemaking
• Holemaking • High-Performance Solid Carbide Drills
• Holemaking • Modular Drills
• Holemaking • Indexable Drills
• Holemaking • Modular Drills
• Holemaking • Indexable Drills
• Holemaking • Hole Finishing
• Tapping
• Tapping Portfolio
• Index by Order Number
• Index by Catalogue Number
• Global Contacts
• Informational Icons Guide
• Material Overview • DIN

Hole Finishing Reamer Custom Solution Capabilities Reamer Troubleshooting (continued) Problem Cause Possible Remedy 1. Reaming tool running out of centre. • Use equalising adaptor. Conical hole profile wider at drill entry point 2. Slanted cutting surface/asymmetrical • Spot face as drilling preparation. cutting. • Take the direction of impact 3. Workpiece twisted. into account when clamping the workpiece. Surface quality does not meet specification 1. Tool cutters worn. • Use equalising adaptor. 2. Reaming tool running out of centre. • Re-align, use floating head. 3. Incorrect technology data • Change cooling lubricant. (cutting parameters). • Change cutting speed. 4. Inadequate chip evacuation. • Measure reamers and send for repairs. 1. Built-up edge. • Change cooling lubricant. Feed grooves • Change cutting speed. widia.com W33