Каталог Tungaloy инструмент для автоматов швейцарского типа - страница 95

Предыдущая страница Следующая страница

Навигация

WF OAWHF OAW BHWFHF WF OAWHF BH WFBH OAWHF BH GradeInsertExt. ToolholderInt. ToolholderThreadingGroovingEndmillDrilling ToolTechnical Reference JSDJ2CR/L-CHPScrew-on toolholder with 93° approach angle, for positive 55° rhombic inserts, with high pressure coolant capability 1 Without offset 30° LFLH LFLH LFLH 93° 5/16”-24UNF 5/16”-24UNF Cutting edge style J2 Fig.1 5/16”-24UNFFig.2 Fig.3 Right hand (R) shown. 2 Designation H B LF LH HF WF OAW RE** Insert Torque* Fig. JSDJ2CR1012H07-CHP (*) 10 12 100 17 10 0 16.4 0.2 DC**0702... 1.2 1 JSDJ2CR/L1212F07-CHP 12 12 85 18 12 0 18 0.2 DC**0702... 1.2 3 JSDJ2CR/L1212F11-CHP 12 12 85 19 12 0 20.5 0.2 DC**11T3... 1.2 3 JSDJ2CR1212X11-CHP (*) 12 12 120 19 12 0 20.5 0.2 DC**11T3... 1.2 2 JSDJ2CR1616X11-CHP (*) 16 16 120 19 16 0 20.5 0.2 DC**11T3... 1.2 2(*) Direct coolant supply*Torque: Recommended clamping torque (N∙m)**RE: Standard corner radius3 SPARE PARTS Designation ClampingscrewCoolant nozzle Nozzle retainerscrewCoolant unit Wrench 1 Coolant plug Wrench DirectJet plug Wrench 2 JSDJ2CR1012H07-CHP CSTB-2.5 NZ-1.10-7-CHP SSHM4-4-TB - T-8F SR5/16UNFTL360 P-4 SSHM4-6-TB P-2 JSDJ2CR/L1212F07-CHP CSTB-2.5 - - S-CU-CHP T-8F SR5/16UNFTL360 P-4 - -JSDJ2CR/L1212F11-CHPCSTB-4SD--S-CU-CHPT-8FSR5/16UNFTL360P-4--JSDJ2CR**11-CHPCSTB-4SD-S-CU-CHP-T-8FSR5/16UNFTL360P-4SSHM4-6-TBP-24 JSDJCR-FScrew-onstepped-head toolholder with 93° approach angle, for positive 55° rhombic inserts 5 LF HBKL 93° L2LH 6 Cutting edge style J Right hand (R) shown. Designation H B LF L2 HBKL LH HF WF OAW RE** Insert Torque* JSDJCR1016X07-F15 10 16 120 12.5 27 14 10 15 26 0.2 DC**0702... 1.2 JSDJCR1216F07-F15 12 16 85 12.5 27 14 12 15 26 0.2 DC**0702... 1.2 JSDJCR1216X07-F15 12 16 120 12.5 27 14 12 15 26 0.2 DC**0702... 1.2 JSDJCR1216F11-F15JSDJCR1216X11-F15JSDJCR1620X11-F151216 85 12.5 27 20 12 15 28 0.2 DC**11T3... 1.2121612012.527201215280.2DC**11T3...1.2162012012.527201615280.2DC**11T3...1.27 *Torque: Recommended clamping torque (N∙m) **RE: Standard corner radius SPARE PARTS Designation Clamping screw WrenchJSDJCR**07-F15CSTB-2.5T-8FJSDJCR**11-F15CSTB-4SDT-8F 8 9 Reference pages : JSDJ2CR/L-CHP, JSDJCR-F: Inserts → 2-15 -, CBN → 2-63, PCD → 2-70 Parts for coolant hose → 3-61 3-13