Каталог TooTool техническая информация 1 - страница 144

Technical Information for Threading A\ Grade Use Recommended Cutting Speed Vc (m/min) TTIP30 P10-P25, K10-K20 TiN coated, yellow color, the universal grade for generalsteel, recommended for rigid cutting condition. Material Hardness TTIP30 TTIM45 TTIG30 TTIS30 TPK01 P Low alloy steel (alloyingelements <5%) < HB180 100-180 80-130 60-140 70-140 TiALN coated, black color; Multi-Layer PVD coated for Steel High alloy steel (alloying elements HB180-280 50-70 60-80 60-80 50-100> 5%), cast steel, and tool steel TTIM45 P20- P40, K20-K30 stainless steel 8t steel medium machining M Stainless steel 8l Cast steel < HB200 60-90 90-130 40-120 90-140 Stainless steel TiALN coated, purple color, is a very high versatilityTTIG30P20-P30, K20-K30coating with excellent toughness and chippingresistance, can play a high performance in a varietyKCast iron Nodular (GGG)HB160-260 80-110 100-130 60-120 90-120Grey cast iron (GG)Tensile Strength< 350Mpa90-100120-13080-12060-130 of processing. Cast iron Malleable cast iron HB130-230 80-100 100-130 60-120 60-140 N Aluminum alloyCopper and cooper alloy< HB100 50-350 200- 500< HB100110-180260-400200-400 200- 55080-225150-250 Sub-micro grade with AITiN multy-layer coating, Brazen Non- TTIS30 P10-P30, K10-K30 color, compatible with all series of stainless steel 81 steel< HRC50 high & medium machining ferrous alloy Non metallic 150-210 100-200sHigh Temperature. Alloys, Super Alloys25-6020-4030- 50 Heat resistant Titanium Alloy 35-45 25-65 50-70 35-45 material TPK01 K10-K30 uncoated grade for non-ferrous, cast iron andtitanium-alloy materials H Hardened steel HRC45- 55 35-45 20-60 40- 60 Hardened material Recommended cutting speed as per workpiece Calculation of N [RPM ] Workpiece •< > X n= vc X 1000JIX D VC = nXDXn1000 n - Revolution Per Minute [min- 1 ]vc - Cutting Speed [m/min] P Carbon steel, Alloy steel,Cast steel TTIP30 TTIM45 D - Workpiece Diameter [mm]vc Number of Passes TTIS30 M Stainless steel, Heat resistantsteel, Titanium alloy steel TTIM45 mm 0.50 | 0.75 | 1.00 | 1.25 | 1.50 | 1.75 | 2.00 | 2.50 | 3.00 | 3.50 | 4.00 | 4.50 | 5.00 | 5.50 | 6.00 | 8.00Pitchtpi48322420161412108765.554.543 TTIG30 No. of passes 4—6 4-7 4-8 5-9 6-10 7-12 7- 12 8- 14 9-16 10—18 11 —18 11 — 19 12-2 12-20 12-20 15-24 K Carbon Iron, Aluminum,Cast steel, Copper TTIP30 TTIM45 SKOne cutting depth is calculated by total cutting depth divided into machining timesex)16ER- 1.5ISO, hmin 0.92 : If lOtimes machining, one cutting depth is 0.092(0.92/10) 287 288