For the Smooth and Reliable Cutting Action of Aluminium Wavemill Series WAX Type Overview Based on our proven Wavemill design this new range of WAX cutters is capable of rough and finishing Aluminium Alloys and other Non Ferrous Metals. It is ideal for high productivity Aluminium machining to exacting tolerances in the Aircraft, Electronics, and Automotive industries. The award winning Auroracoat DLC (diamond like carbon) inserts resist chip adhesion and substantially increase both tool life and productivity when dry machining Aluminium helping customers boost compliance with ISO14001 accreditation standards Advantages l High Productivity l Dry machining capability with MQL system l DLC (diamond like carbon) inserts l True 90 degree shoulder milling l Chip adhesion resistance l Wide range of nose radius Ramping (Slant Milling) WAX3000 E/EL Type (mm) Maximum ramping angle (a max. max.) depends on cutter diameter. Cutter Diameter Ramping Angle Depth- of Cut Milling Distance Minimum milling length (L min) is the ramping distance required to reach the maximum øD a max. doc max. L min. cutting depth (doc max) at the maximum ramping angle of that cutter. 20 8° 10 72 Minimum milling length (L) for any depth can be calculated by the equation below: 25 17° 10 33 32 12° 10 47 40 9° 10 64 L docL=tan a(mm) WAX3000 RS Type (mm) Cutter Diameter Ramping Angle Depth- of Cut Milling Distance øD a max. doc max. L min. 50 7° 10 82 60 5° 10 115 a doc 80 3° 10 191 100 3° 10 191 125 2° 10 287 Helical Milling Helical Milling Diameter (mm) øD1 Cutter Diameter Milling Diameter øD1 øD Min. Max. 20 22 33 25 29 43 32 43 57 40 59 73 50 79 93 63 105 119 øD 80 139 153 100 179 193 125 229 243 Maximum Allowable Spindle Speed Cutter Diameter Spindle Revolution Cutting Speed øD n (min-1) vc (m/min) 20 14.000 880 25 29.000 2.200 32 25.000 2.500 40 23.000 2.900 Recommended Cutting Conditions 50 20.000 3.1006318.0003.500 Work Material Aluminum Alloy 80 16.000 4.000 Cutting Speed 600 ~ 1.200 m/min 100 14.000 4.400 125 13.000 5.100 Feed Rate 0,05 ~ 0,25 mm/tooth H27 Endmills Indexable