Заказ инструмента: http://steelcam.org Negative Insert Geometries 8 (343) 382-52-03 | sales@sverla-ekb.ru 3F Inserts 3F Geometry Technical Information CNGG120408E-3F Steel:SAtaTinIle3s1s 6S™teel: ATI 316! CNGGS43t2a-3inF less Introduction Finishing to Light Roughing: The 3F Geometry has a precision ground periphery to ensure a CNGG120408E-3F precise cutting edge profile, with accurate indexability. The micro edge conditioning reduces the cutting pressure, built-up edge and improves 0.118 3,00 the surface finish in difficult to machine materials. Available in Grade: SP0819 0.100 2,5 Materials Application SP0819 Cutting Condition 0.080 2,00 3F P M K N S H ap (depth of cut) ap (depth of cut) 0.060 1,50 4 4 8 0.040 1,00 Profile 0.020 0,50 0,10 0,20 0,30 0,40 0,50 0,60 0.004 0.008 fn0.(0f1e2ed/rev0).016 0.020 0.023 fn (feed /rev) 3J Inserts 3J Geometry Technical Information Stainless Steel: ATI 316™ CNMG120408E-3J Stainless Steel: ATI 316! Medium to Light Roughing: CNMG432A-3J The 3J Geometry has a smooth cutting action which reduces cutting inch mm CNMG120408E-3J forces, improves surface finishes and increases the tool life, making it ideal for the machining of Stainless Steels. Available in Grade: SP4019 0.118 3,00 Materials Application 0.100 2,50 SP4019 Cutting Condition P M K N S H 0.080 2,00 3J 4 4 Light ap (depth of cut)0.0601,50 Profile ap (depth of cut) 0.040 1,00 0.020 0,50 mm 0,10 0,20 0,30 0,40 0,50 0,60 inch 0.004 0.008 fn (0fe.0e1d2/rev)0.016 0.020 0.023 f (feed/rev) Material Guide – Key to Recommended Inserts Material Designation PP Unalloyed Steels PP Alloyed Steels MM Stainless Steels MM PH Stainless KK Cast Irons NN Aluminum & Alloys SS High Temp. Alloys HH Hard Materials C14 www.kennametal.com