Заказ инструмента: http://steelcam.org Geometry User Guide 8 (343) 382-52-03 | sales@sverla-ekb.ru Introduction 1st Choice 1 Application information 4 Identifies depth of cut (D.O.C) and feed rate range applicable Diamond will indicate the 2 Material Guide information – to the geometry. recommended insert for each diamond indicates the material. Stellram’s Material recommended materials 5 Cutting condition applicable Guide enables you to find the related to the geometry. to geometry. right insert for your machining 3 Detailed outline of geometry requirements. profile. 2N Inserts 2N Geometry Technical Information 1 Alloyed Steel: 900 - 1200 N/mm2 HBN 260 - 340 Light to Medium Roughing: inch mm CNMG120408E-2N The 2N Geometry’s positive rake angle, provides a positive cutting action 0.157 4,00 with reduced cutting pressure, making it an excellent first choice for a wide range of applications and materials. Available in Grades: NL250, NL300 & NL920 0.118 3,00 Materials Application 5 0.100 2,50 NL250 Cutting Condition P M K N S H 0.080 2,00 ap (depth of cut) 2N 4 4 4 0.060 1,50 NL300 P M K N S H Profile ap (depth of cut) 0.040 1,00 NL920 0.020 0,50 P M K N S H mm 0,10 0,20 0,30 0,40 0,50 0,60 inch 0.004 0.008 0f.n01(f2eed/r0e.v0)16 0.020 0.023 fn (feed/rev) 2 3 4 C12 www.kennametal.com