Общий каталог SGS 2021 - страница 36

METRIC Z-Carb-HPR 37° POS 5 TOLERANCES (mm) ≠ 6 DIAMETER DC = +0,000/–0,030 DCON = h6 RE = +0,000/–0,050 >6–10 DIAMETER LFAPMX DC = +0,000/–0,040DCON = h6 RE = +0,000/–0,050 Z5MCR DC DCON >10–25 DIAMETERDC= +0,000/–0,050NCDDCON = h6 METRIC SERIES RE RE = +0,000/–0,050 CONTINUED mm EDP NO. NON- • An ideal balance of helix,indexing, flute depth, CUTTING TI-NAMITE-A TI-NAMITE-MCUTTINGLENGTHOVERALLSHANKCORNERCENTERTI-NAMITE-ATI-NAMITE-A(TA)TI-NAMITE-MTI-NAMITE-M(TM)DIAMETEROF CUTLENGTHDIAMETERRADIUSDIAMETER(TA)(TA)W/INTERNAL(TM)(TM)W/INTERNAL rake and relief DC APMX LF DCON RE NCD W/FLAT COOLANT W/ FLAT COOLANT • Variable indexing forchatter supression and16,035,0 92,0 16,0 2,0 5,59 47132 48037 47135 47035 47042 47049 patented edge geometryfor shearing and strength16,035,092,0 16,0 2,5 5,59 48018 48038 48058 47036 47043 47050 • Chatter-free geometry 16,0 35,0 92,0 16,0 3,0 5,59 47133 48039 47136 47037 47044 47051 allows deep cutting andhigh speed machining16,035,0 92,0 16,0 4,0 5,59 48019 48040 48059 47038 47045 47052 • Central coolant hole 20,0 23,0 92,0 20,0 1,0 7,01 48020 48041 48060 47053 47061 47069 delivers coolant effectively to the cutting 20,0 43,0 104,0 20,0 1,0 7,01 47137 48042 47140 47054 47062 47070 zone enhancing chipremoval when pocketing20,043,0 104,0 20,0 1,5 7,01 48021 48043 48061 47055 47063 47071 or slotting 20,0 43,0 104,0 20,0 2,0 7,01 47138 48044 47141 47056 47064 47072 • Enhanced corner geometry with tight 20,0 43,0 104,0 20,0 2,5 7,01 48022 48045 48062 47057 47065 47073 tolerance corner radii• Excels at roughing,20,043,0 104,0 20,0 3,0 7,01 47139 48046 47142 47058 47066 47074 ramping, high speed 20,0 43,0 104,0 20,0 4,0 7,01 48023 48047 48063 47059 47067 47075 machining and finishing in a variety of materials 20,0 43,0 104,0 20,0 5,0 7,01 48024 48048 48064 47060 47068 47076 • Recommended formaterials ≤ 45 HRc25,0 28,0 100,0 25,0 1,0 8,76 48025 48049 48065 47077 47084 47091 (≤ 420 Bhn) 25,0 53,0 121,0 25,0 1,0 8,76 47143 48050 47146 47078 47085 47092 25,0 53,0 121,0 25,0 2,0 8,76 47144 48051 47147 47079 47086 47093 STEELS 25,0 53,0 121,0 25,0 2,5 8,76 48026 48052 48066 47080 47087 47094 STAINLESS STEELS 25,0 53,0 121,0 25,0 3,0 8,76 47145 48053 47148 47081 47088 47095 25,0 53,0 121,0 25,0 4,0 8,76 48027 48054 48067 47082 47089 47096 CAST IRON 25,0 53,0 121,0 25,0 5,0 8,76 48028 48055 48068 47083 47090 47097 HIGH TEMP ALLOYS TITANIUM HARDENED STEELS For patent information visit www.ksptpatents.com 36 END MILLS wwwE.kNyDoMceILraLS-sgstool.com