Общий каталог SGS 2021 - страница 256

FRACTIONAL & METRIC Hi-PerCarb® 30° 124° 3 OAL LCF LS LU DC DCON 131N 5xD TOLERANCES (inch) FRACTIONAL & METRIC SERIES ≤.1181 DIAMETER DC = +.00008/+.00047 • Triple margin design inch & mm EDP NO. DCON = h6 improves hole stability CUTTING DECIMAL METRIC TAP SIZE SHANK OVERALL FLUTE CLEARED SHANK UNCOATED Ti-NAMITE-B and size control while DIAMETER EQUIV. EQUIV. REFERENCE DIAMETER LENGTH LENGTH LENGTH LENGTH (TiB2) >.1181–.2362 DIAMETER providing superior DC ONLY DCON OAL LCF LU LS DC = +.00016/+.00063 finish, roundness and 23/64 0.3594 9.13cylindricity 10,0 103,0 61,0 49,0 40,0 55019 54819 DCON = h6 9,2 mm 0.3622• Self-stabilizing pyramidM10 X 0,7510,0103,0 61,0 49,0 40,0 65062 64862 >.2362–.3937 DIAMETER point design stabilizes 9,3 mm 0.3661 10,0 103,0 61,0 49,0 40,0 65063 64863 DC = +.00024/+.00083 the drill on contact withthe workpieceU 0.3680 9.35 7/16-14 10,0 103,0 61,0 49,0 40,0 55020 54820 DCON = h6 • Open flute structure 9,4 mm 0.3701 10,0 103,0 61,0 49,0 40,0 65064 64864 >.3937–.7087 DIAMETER efficiently transports 9,5 mm 0.3740 M11 / M10 X 0,5 10,0 103,0 61,0 49,0 40,0 65065 64865 DC = +.00028/+.00098 chips while maintaining 3/8 0.3750 9.53strength at high 10,0 103,0 61,0 49,0 40,0 55021 54821 DCON = h6 feed rates 9,6 mm 0.3780 10,0 103,0 61,0 49,0 40,0 65066 64866 >.7087–1.1811 DIAMETER • Sculpted gash allows 9,7 mm 0.3819 10,0 103,0 61,0 49,0 40,0 65067 64867 DC = +.00031/+.00114 chips to easily flow awayfrom the drill center9,8 mm0.3858 10,0 103,0 61,0 49,0 40,0 65068 64868 DCON = h6 • Recommended for 9,9 mm 0.3898 10,0 103,0 61,0 49,0 40,0 65069 64869 materials ≤ 175 Bhn 25/64 0.3906 9.92 7/16-20 10,0 103,0 61,0 49,0 40,0 55022 54822 TOLERANCES (mm) (≤ 16 HRc) 10,0 mm 0.3937 10,0 103,0 61,0 49,0 40,0 65070 64870 ≤3 DIAMETER 10,1 mm 0.3976 12,0 118,0 71,0 56,0 45,0 65071 64871 DC = + 0, 0 0 2 /+ 0, 012 10,2 mm 0.4016 M12 X 1,75 12,0 118,0 71,0 56,0 45,0 65072 64872 DCON = h6 10,3 mm 0.405513/320.406210.32 12,0 118,0 71,0 56,0 45,0 65073 6487312,0118,071,056,045,05502354823>3–6 DIAMETERDC=+0,004/+0,016 10,4 mm 0.4094 12,0 118,0 71,0 56,0 45,0 65074 64874 DCON = h6 10,5 mm 0.4134 M12 X 1,5 12,0 118,0 71,0 56,0 45,0 65075 64875 10,6 mm 0.4173 12,0 118,0 71,0 56,0 45,0 65076 64876 >6–10 DIAMETERDC=+0,006/+0,021 10,7 mm 0.4213 12,0 118,0 71,0 56,0 45,0 65077 64877 DCON = h6 27/64 0.4219 10.72 1/2-13 12,0 118,0 71,0 56,0 45,0 55024 54824 10,8 mm 0.4252 M12 X 1,25 12,0 118,0 71,0 56,0 45,0 65078 64878 >10–18 DIAMETER DC = +0,007/+0,025 10,9 mm 0.4291 12,0 118,0 71,0 56,0 45,0 65079 64879 DCON = h6 11,0 mm 0.4331 M12 X 1 12,0 118,0 71,0 56,0 45,0 65080 64880 11,1 mm 0.4370 12,0 118,0 71,0 56,0 45,0 65081 64881 NON-FERROUS 7/16 0.4375 11.11 1/4-18NPT 12,0 118,0 71,0 56,0 45,0 55025 54825 11,2 mm 0.4409 12,0 118,0 71,0 56,0 45,0 65082 64882 PLASTICS/COMPOSITES 11,3 mm 0.4449 12,0 118,0 71,0 56,0 45,0 65083 64883 11,4 mm 0.4488 12,0 118,0 71,0 56,0 45,0 65084 64884 For patent 11,5 mm 0.4528 M12 X 0,5 12,0 118,0 71,0 56,0 45,0 65085 64885 information visit 11,6 mm 0.4567 12,0 118,0 71,0 56,0 45,0 65086 64886 www.ksptpatents.com 11,7 mm 0.4606 12,0 118,0 71,0 56,0 45,0 65087 64887 11,8 mm 0.4646 12,0 118,0 71,0 56,0 45,0 65088 64888 continued on next page 256 DRILLS www.kDyRoIcLeLrSa-sgstool.com