Общий каталог SGS 2018 - страница 59

METRIC Z- Carb-MD NEG 4 ≠ TOLERANCES (mm) ZD1MCR 3–6 DIAMETER METRIC SERIES D1 = +0,000/–0,030 D2 = h6 mm EDP NO. • The original Z-Carb R = +0,000/–0,050 CUTTING LENGTH OVERALL SHANK REACH CORNER Ti-NAMITE-X design with negative DIAMETER OF CUT LENGTH DIAMETER RADIUS rake, heavy core, and >6–10 DIAMETER D1 L2 L1 D2 L3 R higher helix for strength D1 = +0,000/–0,040 3,0 4,0 57,0 6,0 15,0 0,2 46560 and shearing of hard mold & die materials D2 = h6 4,0 5,0 57,0 6,0 15,0 0,3 46561 • Unequal helix design R = +0,000/–0,050 5,0 6,0 57,0 6,0 15,0 0,5 46562 aids in damaging >10–20 DIAMETER 6,0 7,0 57,0 6,0 15,0 1,0 46563 harmonics by changing the angle at which each D1 = +0,000/–0,050 8,0 10,0 63,0 8,0 25,0 1,0 46564 cutting edge enters and D2 = h6 10,0 12,0 72,0 10,0 30,0 1,0 46565 exits the material R = +0,000/–0,050 • Unequal flute spacing 12,0 15,0 83,0 12,0 35,0 1,0 46566 helps to disrupt the 16,0 20,0 92,0 16,0 45,0 1,5 46567 rhythmic pattern created by the cutting HARDENED STEELS 20,0 24,0 104,0 20,0 55,0 2,0 46568 edge helping to suppress damaging harmonics For patent • Enhanced corner information visit geometry with tight www.ksptpatents.com tolerance corner radii • Recommended for materials 35-60HRc (327 to 654 Bhn) www.kyocerEaN-DsgMstILoLoSl.com END MILLS 5 9