Общий каталог SGS 2018 - страница 130

FRACTIONAL S-Carb® POS 3 ® 43 TOLERANCES (inch) Fractional Series 1/8–3/16 DIAMETER D1 = +0.0000/–0.00032 • Circular land allows inch EDP No. D2 = h6 for increased control Cutting Length Ov erall Shank Uncoated Ti-NAMITE-B 1/4–3/8 DIAMETER at various speed and Diameter of Cut Length Diameter (TiB2) feed rates and reduces D1 l2 L1 D2 D1 = +0.0000/–0.00035 chatter 1/8 3/8 1-1/2 1/8 34701 34728 D2 = h6 • Symmetrical end gashing 3/16 5/16 2-1/2 3/16 34822 34857 for excellent balance 3/16 9/16 2 3/16 34702 34729 1/2–5/8 DIAMETER at high speeds and D1 = +0.0000/–0.00043 aggressive plunging 3/16 3/4 2-1/2 3/16 34823 34858 h6 capability 1/4 3/8 2 1/4 34703 34730 D2 = • Open fluting for deep 1/4 1/2 2-1/2 1/4 34824 34859 3/4–1 DIAMETER slotting and profiling D1 = +0.0000/–0.00051 • Recommended for 1/4 3/4 2-1/2 1/4 34704 34731 D2 = h6 materials ≤ 150 Bhn 1/4 1 3 1/4 34825 34860 (≤ 7 HRc) 1/4 1-1/4 3-1/2 1/4 34705 34732 1/4 1-3/4 4 1/4 34826 34861 NON-FERROUS 5/16 7/16 2 5/16 34706 34733 PLASTICS/COMPOSITES 5/16 5/8 2-1/2 5/16 34707 34734 5/16 1-1/4 4 5/16 34708 34735 For patent 3/8 1/2 2 3/8 34709 34736 information visit 3/8 1 2-1/2 3/8 34710 34737 www.ksptpatents.com 3/8 1-1/4 3-1/2 3/8 34827 34862 3/8 1-1/2 3-1/2 3/8 34711 34738 3/8 2 4 3/8 34828 34863 1/2 5/8 2-1/2 1/2 34712 34739 1/2 1 3 1/2 34830 34865 1/2 1-1/4 3-1/4 1/2 34713 34740 1/2 1-5/8 4 1/2 34831 34866 1/2 2-1/2 5 1/2 34832 34867 1/2 2 4 1/2 34714 34741 1/2 3-1/8 6 1/2 34715 34742 5/8 3/4 3 5/8 34716 34743 5/8 1-5/8 3-3/4 5/8 34717 34744 5/8 2-1/8 4 5/8 34833 34868 5/8 2-1/2 5 5/8 34718 34745 5/8 3-1/4 6 5/8 34834 34869 5/8 3-3/4 6 5/8 34719 34746 3/4 1 3 3/4 34720 34747 3/4 1-5/8 4 3/4 34721 34748 3/4 2-1/4 5 3/4 34722 34749 3/4 3-1/4 6 3/4 34723 34750 1 1-1/4 4 1 34724 34751 1 2 4-1/2 1 34725 34752 1 2-5/8 6 1 34726 34753 1 3-1/4 6 1 34727 34754 1 4-1/8 7 1 34835 34870 130 END MILLS wwwE.kNyDoMceILraLS-sgstool.com