FRACTIONAL M4E • 8xD 30° POS 15° 4 LF APMX TOLERANCES (inch) DCON M4E • 8xD .010–.120 DIAMETER DC FRACTIONAL SERIES DC = +0.000/–0.001 DCON = h6 inch EDP NO. • Four flute design CUTTING SHANK LENGTH OVERALL allows for higher feed DIAMETER DIAMETER OF CUT LENGTH UNCOATED TI-NAMITE-A rates and decreased STEELS DC DCON APMX LF (AlTiN) deflection, improving STAINLESS STEELS 0.010 1/8 0.080 2-1/2 00611 02667 productivity andsurface finish. 0.015 1/8 0.120 2-1/2 00612 02668 • Proprietary coating CAST IRON 0.020 1/8 0.160 2-1/2 00613 02669 allows for superior chip flow, driving industry HIGH TEMP ALLOYS 0.025 1/8 0.200 2-1/2 00614 02670 leading productivity TITANIUM 0.030 1/8 0.240 2-1/2 00615 02671 and value, even at lowspindle speeds. HARDENED STEELS 0.031 1/8 0.248 2-1/2 00616 02672 • High performance 0.035 1/8 0.280 2-1/2 00617 02673 carbide substrate NON-FERROUS 0.040 1/8 0.320 2-1/2 00618 02674 designed specifically forMicro Tool applications. PLASTICS/COMPOSITES 0.045 1/8 0.360 2-1/2 00619 02675 • Broad portfolio, offering 0.047 1/8 0.376 2-1/2 00620 02676 consistent lengthsof cut, to ensure 0.050 1/8 0.400 2-1/2 00621 02677 application demands 0.055 1/8 0.440 2-1/2 00622 02678 are met. 0.060 1/8 0.480 2-1/2 00623 02679 • Advanced geometriesthat extend tool life, 0.062 1/8 0.496 2-1/2 00624 02680 reduce chatter, cut cycletimes, and improve part 0.065 1/8 0.520 2-1/2 00625 02681 quality. 0.070 1/8 0.560 2-1/2 00626 02682 • All tools in stock to 0.075 1/8 0.600 2-1/2 00627 02683 meet customer orderrequirements. 0.078 1/8 0.624 2-1/2 00628 02684 • All micro tools are 0.080 1/8 0.640 2-1/2 00629 02685 manufactured inaccordance with the 0.085 1/8 0.680 2-1/2 00630 02686 KSPT ISO certified 0.090 1/8 0.720 2-1/2 00631 02687 quality procedures. 0.093 1/8 0.744 2-1/2 00632 02688 0.095 1/8 0.760 2-1/2 00633 02689 0.100 1/8 0.800 2-1/2 00634 02690 0.110 1/8 0.880 2-1/2 00635 02691 0.115 1/8 0.920 2-1/2 00636 02692 0.120 1/8 0.960 2-1/2 00637 02693 www.sgsmicErNoDtoMoIlLsL.cSom END MILLS 73