Общий каталог Mitsubishi 2020 - 2021 - страница 1457
Навигация
Каталог Mitsubishi Materials запасные части
Каталог Mitsubishi Materials резьбонарезной инструмент
Каталог Mitsubishi Materials СНП с CBN и PCD для токарной обработки
Каталог Mitsubishi Materials сверлильные инструменты
Каталог Mitsubishi Materials расточной инструмент
Каталог Mitsubishi Materials пластины для точения 
Tool Overhang
Recommended cutting conditions on this literature are chosen based on deflection,
vibration and machined surface when using a CAT50 arbor. Conditions-"a" is the
length from a gage line to the arbor end face, and "b" is the neck length (tool
| a | overhang from the arbo | ). | ||||
| c | Cutting Diameter : DC | Type | a | b | c | |
| Short | 1.5 | 5.5 | ||||
| b | .625" | Medium | 2.5 | 6.5 | ||
| Long | 3.5 | 7.5 | ||||
| Short | 1.5 | 5.5 | ||||
| .750" | Medium | 2.5 | 6.5 | |||
| DC | Long | 4 | 3.5 | 7.5 | ||
| Short | 2.0 | 6.0 | ||||
| Peripheral | 1.000" | Medium | 3.0 | 7.0 | ||
| utting th | Long | 4.0 | 8.0 | |||
| um c leng Inner/Outer | Short | 2.0 | 6.0 | |||
| p ax. axim edge | 1.250" | Medium | 3.5 | 7.5 | ||
| a m M | Long | 5.0 | 9.0 |
(Inch)
(Long cutting edge type)
Recommended Depth of Cut for Long Cutting Edge Type
The maximum cutting edge length of the long cutting edge type with a peripheral insert is 1.4-1.5DC. The peripheral insert is for light machining only. Please refer the recommended cutting condition or page L285.