Каталог Iscar вращающийся инструмент 2017 - страница 70

MM S-D (89° conical shanks) D2 d 89° Conical Shanks for a° Interchangeable Milling Heads Tsi h L1 L Designation Tsi a° d D 2 L 1 L Shank m. h RPM max (2) kg MM S-D-L100-C12-T05 T05 89 12.00 7.60 35.0 100.00 S 29.60 N 52000 0.080 MM S-D-L110-C12-T05-C T05 89 12.00 7.60 60.0 110.00 C 55.90 N 53430 0.126 MM S-D-L110-C12-T05-W-H T05 89 12.00 7.60 60.0 110.00 W 55.70 Y 38460 0.140 MM S-D-L130-C12-T05-C T05 89 12.00 7.60 80.0 130.00 C 77.30 N 36420 0.148 MM S-D-L130-C12-T05-W-H T05 89 12.00 7.60 80.0 130.00 W 76.40 Y 26160 0.164 MM S-D-L150-C16-T05-C T05 89 16.00 7.60 100.0 150.00 C 91.50 N 29700 0.275 MM S-D-L110-C12-T06-W-H T06 89 12.00 9.60 60.0 110.00 W 58.80 Y 36990 0.170 MM S-D-L130-C16-T06-W-H T06 89 16.00 9.60 80.0 130.00 W 73.40 Y 29490 0.285 MM S-D-L150-C16-T06-C T06 89 16.00 9.60 100.0 150.00 C 95.40 N 30150 0.272 MM S-D-L150-C16-T06-W-H T06 89 16.00 9.60 100.0 150.00 W 93.80 Y 21660 0.326 MM S-D-L160-C16-T06 T06 89 16.00 9.60 55.0 160.00 S 46.80 N 23370 0.120 MM S-D-L170-C16-T06-C T06 89 16.00 9.60 120.0 170.00 C 116.90 N 23400 0.110 MM S-D-L170-C16-T06-W T06 89 16.00 9.60 55.0 170.00 W 46.30 N 21210 0.484 MM S-D-L130-C16-T08-C T08 89 16.00 11.60 80.0 130.00 C 77.20 N 39870 0.282 MM S-D-L130-C16-T08-W-H T08 89 16.00 11.60 80.0 130.00 W 76.40 Y 29040 0.320 MM S-D-L150-C16-T08-C T08 89 16.00 11.60 100.0 150.00 C 97.80 N 29970 0.330 MM S-D-L150-C16-T08-W-H T08 89 16.00 11.60 100.0 150.00 W 98.30 Y 21540 0.384 MM S-D-L170-C20-T08 T08 89 20.00 11.60 80.0 170.00 S 69.70 N 22680 0.303 MM S-D-L170-C20-T08-C T08 89 20.00 11.60 120.0 170.00 C 112.00 N 26250 0.473 MM S-D-L170-C20-T08-W T08 89 20.00 11.60 80.0 170.00 W 69.70 N 24900 0.650 MM S-D-L170-C20-T08-W-H T08 89 20.00 11.60 120.0 170.00 W 113.10 Y 18750 0.526 MM S-D-L150-C20-T10-C T10 89 20.00 15.30 120.0 150.00 C 97.50 N 35610 0.525 MM S-D-L150-C20-T10-W-H T10 89 20.00 15.30 100.0 150.00 W 96.80 Y 25800 0.604 MM S-D-L170-C20-T10-C T10 89 20.00 15.30 120.0 170.00 C 118.30 N 28140 0.608 MM S-D-L170-C20-T10-W-H T10 89 20.00 15.30 120.0 170.00 W 118.00 Y 20100 0.726 MM S-D-L190-C20-T10 T10 89 20.00 15.30 80.0 190.00 S 73.70 N 15780 0.420 MM S-D-L190-C20-T10-C T10 89 20.00 15.30 140.0 190.00 C - N 22830 0.682 MM S-D-L190-C20-T10-W-H T10 89 20.00 15.30 140.0 190.00 W - Y 16170 0.832 MM S-D-L210-C20-T10-C T10 89 20.00 15.30 160.0 210.00 C - N 18270 0.754 MM S-D-L210-C20-T10-W-H T10 89 20.00 15.30 160.0 210.00 W - Y 12870 0.926 MM S-D-L180-C25-T12-C T12 89 25.00 18.30 120.0 180.00 C 115.70 N 29460 0.914 MM S-D-L180-C25-T12-W-H T12 89 25.00 18.30 120.0 180.00 W 114.60 Y 20940 1.154 MM S-D-L200-C25-T12-W-H T12 89 25.00 18.30 150.0 200.00 W 146.60 Y 16560 1.207 ENDMILLS • SOLID CARBIDE • MULTI-MASTER MM S-D-L210-C25-T12 T12 89 25.00 18.30 100.0 210.00 S 94.60 N 15540 0.656 MM S-D-L250-C25-T12-C T12 89 25.00 18.30 140.0 250.00 C 135.60 N 16170 1.396 MM S-D-L250-C25-160T12W-H T12 89 25.00 18.30 160.0 250.00 W 157.20 Y 11310 1.765 MM S-D-L250-C25-T12-W-H T12 89 25.00 18.30 140.0 250.00 W 135.60 Y 11300 1.800 MM S-D-L250-C32-T15 T15 89 32.00 23.90 100.0 250.00 S 90.10 N 14160 1.000 MM S-D-L250-C32-T15-C T15 89 32.00 23.90 150.0 250.00 C 143.30 N 20370 1.884 MM S-D-L300-C32-T15-C T15 89 32.00 23.90 200.0 300.00 C 195.70 N 16000 2.616 • Shank material (Shank m.): S-steel, C-carbide, W-tungsten. • Do not apply lubricant to the threaded connection. (2) The maximum RPM must be calculated. Divide the listed max. RPM by the number of flutes (on the milling head) being used. For tools, see pages: • MTE-MM (358) 66 ISCAR