Каталог Iscar токарные пластины ISO 2022 - страница 101

IW7 IS35 IS25 IW7 IS35 IS25 ID5 IN23 ISOTURN INSERTS RCGX-Ceramic 7° BN Round Ceramic Inserts for IC 120° GB Machining Nickel Based Alloys and Hardened Steel S Dimensions Tough 1  Hard Recommended Machining Data ap f Designation IC S GB BN (mm) (mm/rev) RCGX 090700E 9.52 7.94 25.0 0.20 • • • 0.10-3.00 0.07-0.50 RCGX 090700T 9.52 7.94 25.0 0.20 • • • • 0.10-3.00 0.07-0.50 RCGX 090700TE 9.52 7.94 25.0 0.20 • 0.10-3.00 0.07-0.50 RCGX 120700E 12.70 7.94 25.0 0.20 • • • 0.10-4.00 0.07-0.50 RCGX 120700T 12.70 7.94 25.0 0.20 • • 0.10-4.00 0.07-0.50 • For user guide and cutting speed recommendations, see pages 122-134, 236-248 11° RPGX-Ceramic Round Ceramic Inserts for Machining Nickel Based IC 120° Alloys and Hardened Steel S Dimensions Tough 1  Hard Recommended Machining Data ap f Designation IC S (mm) (mm/rev) RPGX 090700E 9.52 7.94 • • 0.50-3.00 0.10-0.45 RPGX 090700T 9.52 7.94 • • • 0.50-3.00 0.10-0.45 RPGX 120700E 12.70 7.94 • • 0.50-4.50 0.10-0.45 RPGX 120700T 12.70 7.94 • • • 0.50-4.50 0.10-0.45 • Tools can be supplied on request. • For user guide and cutting speed recommendations, see pages 122-134, 236-248 CNMA (PCD)80° Rhombic Inserts with a Single 80° 10°RE 95º 95ºLEL5°95º PCD Top Corner Tip and Positive Rake for Finishing Applications IC S Dimensions Recommended Machining Data ap f Designation L IC S RE LE (mm) (mm/rev) CNMA 120404D 12.90 12.70 4.76 0.40 3.9 • 0.10-3.00 0.05-0.26 CNMA 120408D 12.90 12.70 4.76 0.80 3.6 • 0.10-3.00 0.05-0.26 • For user guide and cutting speed recommendations, see pages 122-134, 236-248 For tools, see pages: A/S-PCLNR/L (101) • C#-MULNR/L-MW (16) • C#-PCLNR/L-12-JHP (21) • C#-PCLNR/L-X (24) • C#-PCLNR/L-X-JHP (24) • DCLNR/L (25) • HSK A63WH-MULNR-J12MWX2 (17) • HSK A63WH-MULNR/L-MW (16) • HSK A63WH-MUMNN-MW (17) • MULNR/L-12MW (15) • PCLNR/L (20) • PCLNR/L-12-JHP (21) • PCLNR/L-X (22) • PCLNR/L-X-JHP (23) • PCLNR/L-X-JHP-MC (23) • S-DCLNR/L (99) • S-MULNR-MW (105) • A/S-PCLNR/L-X/G (102) • DCLNR/L-JHP-MC (25) 221