Каталог Iscar отрезка 2022 - страница 78

PARTING IC908IC908 RE CW Ø34 PENTA 34R/L-J PSIRL PSIRR ±0.04 Inserts with 5 Cutting Edges for Parting Tubes, Small and Thin-Walled Parts 4.3 L R Dimensions RecommendedMachining Data f groove Designation CW RE CWTOL(1) CUTDIA(2) PSIRL PSIRR (mm/rev) PENTA 34L150J06D 1.50 0.07 0.02 18.0 6.0 - • 0.03-0.09 PENTA 34L150J15D 1.50 0.07 0.02 18.0 15.0 - • 0.03-0.08 PENTA 34R150J06D 1.50 0.07 0.02 18.0 - 6.0 • 0.03-0.09 PENTA 34R150J15D 1.50 0.07 0.02 18.0 - 15.0 • 0.03-0.08 PENTA 34L200J06D 2.00 0.10 0.02 18.0 6.0 - • 0.04-0.10 PENTA 34L200J15D 2.00 0.10 0.02 18.0 15.0 - • 0.04-0.09 PENTA 34R200J06D 2.00 0.10 0.02 18.0 - 6.0 • 0.04-0.10 PENTA 34R200J15D 2.00 0.10 0.02 18.0 - 15.0 • 0.04-0.09 • For cutting speed recommendations and user guide, see pages 538-547 (1) Cutting width tolerance (+/-) (2) For grooving and parting depths relative to part diameter, see page 537 For tools, see pages: PCADR/L (316) • PCADR/L 34N-RE (318) • PCADR/L-JHP (317) • PCHBR/L (318) • PCHPR/L (316) • PCHR/L-34 (315) • PCHR/L-34-JHP (315) RE CW PENTA 34N-PB ±0.04 34 Parting and Grooving Pentagonal Inserts for Parting Bearing Steel and Other Ductile Materials 4.3 Dimensions RecommendedMachining Data f groove Designation CW RE CWTOL(1) RETOL(2) CDX(3) (mm/rev) PENTA 34N150PB015 1.50 0.15 0.02 0.030 8.50 • 0.03-0.06 PENTA 34N200PB020 2.00 0.20 0.02 0.030 8.50 • 0.03-0.08 PENTA 34N300PB020 3.00 0.20 0.02 0.030 9.50 • 0.03-0.10 • For cutting speed recommendations and user guide, see pages 538-547 (1) Cutting width tolerance (+/-) (2) Corner radius tolerance (+/-) (3) For grooving and parting depths relative to part diameter, see page 534 For tools, see pages: PCADR/L (316) • PCADR/L 34N-RE (318) • PCADR/L-JHP (317) • PCHBR/L (318) • PCHPR/L (316) • PCHR/L-34 (315) • PCHR/L-34-JHP (315) 536 ISCAR