Каталог Iscar обработка канавок 2022 - страница 52

GROOVE-TURN IC830 IC808 IC908 IC20 IC20N LH PHAR/LExternal Machining Holders HF H for PADR/L Adapters HBHOAL CDX B Right-hand shown Designation CDX(1) H HF B OAL HBH Adapter(2) PHAR/L 20 16.30 20.0 20.0 20.0 140.00 10.0 PADR/L 2.4 SR 76-1368 HW 4.0 SR M5-04451 T-20/5 PHAR/L 25 16.30 25.0 25.0 25.0 140.00 5.0 PADR/L 2.4 SR 76-1368 HW 4.0 SR M5-04451 T-20/5 (1) Cutting depth maximum (2) Adapters to be ordered separately. For tools, see pages: PADR/L (306) PADR/LAdapters for GDMW/GDMY OAH HF Groove-Turn Inserts WB OAL WF CDX CWN-CWX Left-hand shown Designation CWN(1) CWX(2) CDX(3) OAL WB HF OAH WF Insert PADR/L 2.4 2.40 3.18 16.30 41.00 1.90 24.0 30.0 4.20 GDMW 2.4 • For user guide, see pages 419-428, 432-436 (1) Minimum cutting width (2) Maximum cutting width (3) Cutting depth maximum For inserts, see pages: GDMW 2.4 (306) For holders, see pages: PHAR/L (306) GDMW 2.4 ±0.1 20 Ref. Utility Double-Ended Inserts for External Turning, 7˚ 5.5 Grooving and Parting CW RE BW Dimensions Tough 1  Hard Recommended Machining Data ap f turn f groove Designation CW RE CWTOL(1) RETOL(2) BW CDX(3) (mm) (mm/rev) (mm/rev) GDMW 2.4 2.40 0.18 0.04 0.030 2.00 18.00 • • • • • 0.25-1.50 0.07-0.12 0.05-0.08 • For cutting speed recommendations and user guide, see pages 419-428, 432-436 (1) Cutting width tolerance (+/-) (2) Corner radius tolerance (+/-) (3) Cutting depth maximum For tools, see pages: PADR/L (306) • PHGR/L (305) • PHSR/L (373) 306 ISCAR