Каталог Iscar концевые фрезы со сменными пластинами 2022 - страница 55

ISO DC=18.0-25.4 DC=16.0-17.9 DC=13.0-15.9IC908 DC=10.0-12.9 DC=8.0-9.9 ENDMILLS • SOLID CARBIDE • MULTI-MASTER Feed vs. Flat-Drill Diameter Tensile Material Strength Kc1(1) Hardness Group Material Condition [N/mm2] [N/mm2] mc(2) HB No. V m/min frev mm/rev < 0.25 %C Annealed 420 1350 0.21 125 1 >= 0.25 %C Annealed 650 1500 0.22 190 2 Non-alloy steeland cast steel,< 0.55 %CQuenchedand tempered850 1675 0.24 250free cutting steelAnnealed75017000.24220380-110-1400.080.10 0.12 0.14 0.1840.100.120.150.170.210.120.140.180.200.24 >= 0.55 %C Quenchedand tempered1000 1900 0.24 300 5 80-105-130 Annealed 600 1775 0.24 200 6 P Low alloy and cast steel (lessthan 5% of alloying elements)Quenchedand tempered930100016750.2427517250.2430078120018000.2435090.06 0.06 0.08 0.10 0.12 60-80-100 0.08 0.08 0.10 0.12 0.14 High alloyed steel, cast Annealed 680 2450 0.23 200 10 0.10 0.10 0.12 0.14 0.16 steel and tool steel Quenchedand tempered1100 2500 0.23 325 11 Stainless steeland cast steel Ferritic/martensitic680 1875 0.21 200 12 0.01 0.02 0.03 0.04 0.0660-80-1000.020.030.040.050.07Martensitic82018750.21240130.030.040.050.060.08 M Stainless steel and cast steel Austenitic,duplex600 2150 0.20 180 0.01 0.02 0.03 0.04 0.061460-80-1000.020.030.040.050.070.030.040.050.060.08 Ferritic/Grey cast iron (GG)pearliticPearlitic /martensitic11500.201801713500.28260180.08 0.10 0.14 0.16 0.18 K Cast iron nodular (GGG) FerriticPearlitic 1225 0.25 16013500.282501516 80-120-160 0.10 0.12 0.16 0.18 0.200.120.140.180.200.22 Malleable cast iron FerriticPearlitic 1225 0.25 130 1914200.3023020 recommended cutting data Spare Parts Designation MM ECDF080A100-2T05 MM KEY 6X4* MM ECDF100A120-2T06 MM KEY 8X5* MM ECDF120A150-2T08 MM KEY 10X7* MM ECDF160A200-2T10 MM KEY 13X8* MM ECDF200A250-2T12 MM KEY 16X9* * Optional, should be ordered separately 0.25x45° LF THSZMS MM EFCB Interchangeable 4 Flute 30° Helix Solid Carbide Heads DC DCONMS for Flat Counter Boring APMX FHA Dimensions RecommendedMachining Data fz Designation DC(1) APMX LF DCONMS THSZMS NOF(2) FHA CHW KCH (mm/t) MM EFCB110A08-4T06 11.00 8.40 16.50 10.00 T06 4 30.0 45.0 0.25 • 0.03-0.04 MM EFCB140A11-4T08 14.00 11.50 28.00 12.00 T08 4 30.0 45.0 0.25 • 0.04-0.05 • 0.06 mm maximum concavity on the tool's bottom • For shanks, see pages 84-91 • For clamping keys (should be ordered separately), tightening torques and clamping instructions, see pages 91-92 • Do not apply lubricant to the threaded connection. • For user guide see pages 44, 177-184 (1) e8 tolerance (2) Number of flutes 53