Каталог Ingersoll новинки 2021 - страница 181

pgarrotoinvging& HIGH-FEED CBN INSERTS FOR HARDENED MATERIALS • T-Clamp CBN inserts for high feed turning of high-hardened workpiece materials • Inclined chip breaker for good chip control at shallow depths of cut (Maximum .0047") • Optimized cutting edge design for high feed bi-directional turning • Excellent surface finish • Significantly improved productivity with a maximum feed rate from .031-.047 ipr ID • Thread TB20OD1T5hreCadBN grBaadlaneced Spot Drill Helical Interp. Facing Lead Angle Plunge Slot Face Groove ID fnr Groove/Turn ID fnr Groove OD fnr Groove/ OD fnr Profile OD Part-Off - Excellent combination of high hardness and moderate fracture toughness Turn Taper - Continuous and light interrupted machining of hardened steel Ream Flat Bottom Corner Rnd Coutersink SERIE Contour S TSRGamp-HF Drill Channel Pocket Face Groove/Turn ID fnr Relief ID fnr Profile OD fnr Groove/TurnOD Groove/Thread OD GrooveGroove/Turn CBN INSERTS FOR HIGH FEED TURNING T-Slot Hole Chamfer Balanced Engrave Cooling Shoulder DrillMill Slab Chamfer ID Groove ID Groove/Turn ID Groove/Thread OD fnr Groove OD GTruoronivneg/Turn Face fnr Relief RE CW BSR 7°AN WBINSL S1 Dimensions (inch) CBN SSC Part Number Insert CWSeat SizeCuttingWidth RECornerRadius WBBodyWidth INSLInsertLength BSR apWiper EdgeDepth of CutRadius(inch)Feed(ipr) TB2015 TSG 3.0-0.3-HF 3 .118 (3mm) 0.012 0.087 0.79 1.18 .003-.005 .016-.031 • TSG 5.0-0.3-HF 5 .197 (5mm) 0.012 0.157 0.98 1.18 .003-.005 .016-.047 • •: Standard items 9º R 30mm .047" (1.2mm) for 3mm wide insert .118" (3.0mm) for 5mm wide insert T-Clamp CBN High Feed inserts feature 9-degree lead angles (left and right sides) along with a large radius on the end of the insert in order to reduce vibration. The presence of these features should be taken into consideration when programming the work piece. 181