Общий каталог Dijet 2018 - страница 43

Modular Head Series Tooling by DIJET QM MAX MQXTYPE Quick&Mini MAX Low cutting Adopted unique 3D geometry insert with low cutting force (25% lower than coventional tool). force QM MAX achieved high efficient machining up to ap=1mm. Maintain stable cutting force & power consumption after 1.7mm depth, in case of deep cavity milling. ÌExcellent for vertical wall machining Multi Multi blades achieves Q=144cc/min. blades Vibration “QM MAX” MQX type can be possible high efficient machining and longer tool life, due to control the free vibration by the combination of MSN carbide shank holder. Insert variation High feed insert High feed insert for unfavorable condition EPMT100312ZER EPMT100312ZER EPMW100312ZER EPMW100312ZTR EPMW100312ZTR Shoulder milling insert Shoulder milling Shoulder milling High hardened steel insert for insert aluminum alloy (From semi-finishing to finishing) ZPMT1003...ZER 0.03mm or less cusp height gives true 90 degree with no ZPMT1003...ZER-NL ZPMT100308ZER-PL EPHW100316ZTR mismatch “MIRROR INSERT” for finishing side & bottom face/ contouring milling CBN High feed and shoulder milling can be processed with YPHW1003...ZER-... YPHW100308ZTR-F1 same body. Moreover, adopted “MIRROR INSERT” achieved high efficient finishing side & bottom face. Adopted PVD coated grade “JC5118” possible to cut general steel, hardened material, titanium alloy and heat-resistant alloy, tough grade “JC8050” for interrupted cutting, and new PVD coated grade “JC7560” improved heat-fracture resistance & impact strength and tool life. And, available now uncoated grade “FZ15” for shoulder milling of aluminum alloy. Moreover, “MIRROR INSERT” YPHW type and shoulder milling insert ZPMT-PL type adopted generic PVD coated grade “JC8015” that have a wide application, cermet “CX75”, and new PVD coated grade “DH102” for high speed machining in high hardened material. And available now CBN grade for “MIRROR INSERT” YPHW type. B027