| ●Ramp milling Tauchfräsen | | APKT R A | amp milling, he PKT Tauchfräs | lical interpola en, Spiral-Int | tion milling (Ins erpolationsfräse | erts—11) n |
| | | Ramp milling Tauchfräsen | | Helical interpo Spiral-Interpo | lation milling lationsfräsen |
| Diameter Durchmesser | Max. | M | | | |
| Ø D (mm) | cutting depth ap(mm) Schnitttiefe | ax. ramp angle α° Eintauchwinkel | Min. length Lm(mm) Länge | Min. diameter Ø D1(mm) Durchmesser | Max. pitch (mm) Steigung |
| ap(α:Maximum ramp angle) | | | | | | |
| Lm= tgα (α:Maximaler Eintauchwinkel) | | | | | | |
| 16 | 10.0 | 10.0 | 56.7 | 20.0 | 2.0 |
| ●Helical interpolation milling | | | | | | |
| Spiral-Interpolationsfräsen | | | | | | |
| 20 | 10.0 | 5.0 | 114.4 | 28.0 | 2.0 |
| 25 | 10.0 | 4.5 | 127.0 | 40.0 | 2.0 |
| tgα =P (α:helical angle) πD1 D1 (α:Spiral Winkel) | 32 | 10.0 | 3.0 | 190.8 | 56.0 | 2.0 |
| 40 | 10.0 | 2.0 | 286.4 | 70.0 | 2.0 |
Каталог ZCC-CT сверла монолитные
Каталог ZCC-CT оснастка
Общий каталог ZCC-CT 2019
Каталог ZCC-CT расточные системы
Каталог ZCC-CT сверла со сменными пластинами