Каталог Winstar фрезерование - страница 30
Навигация
Каталог Winstar монолитный инструмент 2020
Каталог Winstar сверление
Основной каталог Winstar 2021
Каталог Carbidex сменные пластины 2020
Каталог Winstar инструмент со сменными пластинами 2020
H650 - High Helix Square Type - 4F 鎢鋼平銑刀 - 高導型 - 4 刃
．ARCO coating provides a superior wear resistance. ．Suitable for HRC 50 and over HRC 50 Hardened Steel, also maximum up to HRC 65. ．UMG Carbide with Incredible toughness and wear resistance at hi speeds. ．Good surface and long tool life. ．The coating can change to SICO, the prices will differ.
| Order No. | Dia. (d) | CL (L1) | OAL (L) | Shank (D) | Flutes (F) |
| EHSFH401000A | 1.0 | 3 | 50 | 4 | 4 |
| EHSFH401500A | 1.5 | 4 | 50 | 4 | 4 |
| EHSFH402000A | 2.0 | 5 | 50 | 4 | 4 |
| EHSFH402500A | 2.5 | 6 | 50 | 4 | 4 |
| EHSFH403000A | 3.0 | 8 | 50 | 4 | 4 |
| EHSFH404000A | 4.0 | 10 | 50 | 4 | 4 |
| EHSSH404000A | 4.0 | 10 | 50 | 6 | 4 |
| EHSSH405000A | 5.0 | 13 | 50 | 6 | 4 |
| EHSSH406000A | 6.0 | 15 | 50 | 6 | 4 |
| EHSSH408000A | 8.0 | 20 | 60 | 8 | 4 |
| EHSSH410000A | 10.0 | 25 | 75 | 10 | 4 |
| EHSSH412000A | 12.0 | 30 | 75 | 12 | 4 |
| EHSSH416000A | 16.0 | 35 | 100 | 16 | 4 |
| EHSSH420000A | 20.0 | 45 | 100 | 20 | 4 |
EHSSH4
d
L
D
65
Cutting conditions : Table 010
( 建議切削參數表 )
| d | Tolerance |
| Ø≦12 | 0 ~ -0.02 |
| Ø > 12 | 0 ~ -0.03 |